We ran into issues with visitors not being able to authenticate to our guest network. The error: server x.x.x.x:1812 failed to respond to request (ID 90) for client MAC Address / user '3010b309c52a' was displaying on our wireless controller 5508. Aft...
Forum Posts
Does anyone know the work around for this? I can install any V7.x.x image and the AP works fine, install any 8.x.x image and the AP goes into the boot loop failing on the Radio FW Image download. Tried updating the image via Rmon, is there a version...
Getting this error while creating VLAN on Nexus 9372 running IOS 6.1(2)I3(3a), seems like we need to convert to MST from RSTP, what can be the implications of converting it in real time as there is a critical network running on it.
bug is also present in 6.4.0.7 and will occur after snort rule update.
Please I have firepower every 10 minutes it shows us this message After i did some research i got this sow my question is how can i recover mongo corruptioniFMC should identify and recover from mongo corruptionCSCvn38082
This bug indicates it was fixed in 1.0.2.0 in July 2019 however 1.0.2.0 is no longer available for download https://software.cisco.com/download/home/286314846/type/282463166/release/1.0.1.7 Is this bug which was found in 1.0.1.4 fixed in 1.0.1.7 or d...
This bug still remains on our C9200-48P, Version 16.12.1, RELEASE SOFTWARE (fc4) /Daniel
Hello All, How severe is this one? Do we need to upgrade our code or proactively anything can be done to avoid risk. Thanks
So.. status fixed but no info about it?As far as I can tell, 16.06.07, 16.09.02/03/07, 16.12.2S all have the same issue.
How can we set values for Control Processor Warning=90 % and Critical=95%?Current values are:#show platform resources**State Acronym: H - Healthy, W - Warning, C - CriticalResource Usage Max Warning Critical State-----------------------...
Try this: #MODE_ENABLEwrite memory#INTERACTIVErequest platform software package clean switch all <IQ>Do<R>y#ENDS_INTERACTIVE#MODE_END_ENABLE
Hi everyone, I'm deploying DNAC 1.3.3.1 (Cluster or 3 DNAC + 4 ISE nodes) and I'm hitting this Bug : CSCvs59089.Have you seen this ? No workaround.. can't provision AAA on my switches :-/ Best regards,Raphael
This bug is marked as fix. What patch includes the fix? That field is not exposed to the public. Thanks!
Hi. Guys. I created a Site to site VPN tunnel and verified that the VLAN ports on each route communicate with each other.And set up two RV340 devices as below to receive Multicast Stream. However, as shown in the figure below,the STB BOX device (conn...
