Cisco Software Discussions

I am using the NSO program. I have a list of devices. Currently, the output is that of the last device. But I want the output for each device

My customer is trying to integrate Azure AD with Cisco anyconnect VPN, please can you provide documentation to deploy it.

I'm trying to find what the last supported IOS versions are for my 2821 ISR & 3560G Switch.  Currently running the following images:2821: flash:c2800nm-adventerprisek9-mz.151-4.M1.bin3560: flash:c3560-ipbasek9-mz.122-55.SE12/c3560-ipbasek9-mz.122-55....

Hello Cisco Family Hope everyone reading this message is in good health. I am kindly asking with good faith that someone will help me download an IOS for me. I am not a Cisco partner yet but will be one day. That's one objective for the year. But rig...

I work as a Network Engineer for a public authority and we have been upgrading the Cisco IOS on our 2960X layer 2 estate. Before starting this bi-annual procedure all of our 2960X switches were on the ‘c2960x-universalk9-tar.152-4.E6’ software. The c...

this is my current version:Cisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacDocuments: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.htmlCopyright (c) 2002-2016, Cisco Systems, Inc. All r...

Every switch running IOS Version 12.2 (that I've checked so far) seems to remove blank lines when included within a banner. Version 15.0 seems to be fine. Example MOTD banner:*** Warning! *** On IOS Version 12.2 this currently shows:***Warning!*** an...

I've just accepted an offer from Cisco as a Software Engineer in the data department. From the reviews I've seen through glassdoor, it seems to be a comfortable place to work with good employee satisfaction. However, I'm a little worried after hearin...

Hi, This is only affecting one user so I am a bit annoyed. We have a UCCE 10.5 Supervisor set up in Finesse for live monitoring. But when she does try and live monitor an agent, there is no audio and then it goes off the hook after 10 seconds. I have...

Can we use the PCCE sandbox lab to develop and test a  BIB recording solution?

I have ISR 4321 and not be able to boot from flash and not be able to enter rommonI had received this message: PASSWORD RECOVERY IS DISABLED.Do you want to reset the router to the factory defaultconfiguration and proceed [y/n] ?yRouter clearing confi...

Hi everyone,I have problems with my ISRs 4221. Version is 16.7.1. After I generate rsa key and left router couple of days without power, when i enter show ip ssh, it says SSH disabled. Then I have to create a new rsa key. Did anyone have similar prob...

Is there a sandbox that can be used to test BIB call recording?  If yes, which one?  Are there any constriants?