Newbie here.....so keep this in mind when reading. We had a vendor setup our phone system in our company. The system was setup with two cisco 7000 servers. One being a Pub and the other the Sub. I was under the impression that if one of the serve...
Newbie here.....so keep this in mind when reading. We had a vendor setup our phone system in our company. The system was setup with two cisco 7000 servers. One being a Pub and the other the Sub. I was under the impression that if one of the serve...
I used Cisco Secure Client for many years. We had password only, so I could script the login to basically the following:vpncli.exe -s < "C:\Temp\a.txt"with C:\Temp\a.txt providing three lines:connect site/realmusernamepasswordNow, my company introduc...
Hi, I'm currently struggling to understand how to integrate virtual machines with trunk interfaces to our ACI vmware virtual domain.We use a dynamic-pool (vlan 2000-2500) for our vmware-cluster. And want to migrate a vm with a trunk interface (Lets s...
Good morning,My company has recently rolled out anyconnect for the external sales for, which includes me, to allow us to access our network at home.anyconnect connects just fine over my WiFi, but for some reason I cannot access our companies network....
Can anyone tell me the version of Cisco IOS-XR where they made the change to prefer OSPF LSA Type 7's over LSA Type 5's
Czy ktoś z was posiada obraz do access pointa Cisco AP 3802 me w wersji 8.5 lub 8.8. Nie mogę wgrać obrazu z mobbility express do access pointa bo na stronie cisco download nie jest już dostępne. Potrzebuje w wersji zip z ap3g3.Dziękuję
Setting up a new 9800 back to a 5520 I believe it is (it's not IOS-XE.) The 802.1x usually happens on the Anchor WLC apparently - how do i force an SSID on a 9800 (the foreign) to go through 802.1x authentication on the Anchor WLC. It is as simple as...
Hello Team,Currently am managing my Virtual FTD using a virtual FMC.I would wish to manage the virtual FTD locally, command is to make the manager local, correct?secondly, if I do so, will I loose the current configurations on the virtual FTD? If yes...
Hi to all. I bought an old Catalyst 3560 (8 Port POE) - Show version tell me: WS-C3560-8PC 12.2(58)SE2 C3560-IPBASEK9-M. Great device.Now, some hours ago I run a CVE analyzer and tell me to do some upgrades. I checked on the Cisco official site but i...
In a ACI MultiSite environment, say VLAN 10 is stretched crossed between two sites. Within each site, there is NXOS switch connected to the leaf switches with L2 trunk, including VLAN 10.So will VLAN 10 spanning-tree BPDU be transferred across the IS...
Have a 6300 that was zeroized and is at the "$$" prompt, looked online but cannot find the correct instructions to load an iOS image via either the USB OR via the serial cable. Joe
I need training advice for MDS 9700 san switch admin - basic and advance I have done some work from co-worker guidance but would prefer formal training.
When I try to download Windows Server 2019 drivers I cannot. I have a ucs c220 m3.
I have a peculiar question, so we have the any connect software package, license and what not. We now have a use case to use Jumpcloud as our MDM platform and we wanted to automate package installation which is simple enough.The issues is Jumpcloud n...
Hello, im a total noob on cisco and need some help.We are going for VoIP at work and need to route some trafficPort 5060 tcp/udp from 80.xx.xxx.x/20 to 192.168.xxx.xxxCould some one help me out how to do it via ASDM?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-03-2024 02:37 PM | ||
10-02-2024 10:24 AM | ||
10-01-2024 03:08 AM | ||
09-28-2024 02:43 AM | ||
09-27-2024 03:12 AM |
User | Count |
---|---|
1 | |
1 | |
1 | |
1 | |
1 |