Collaboration Knowledge Base

This document was generated from CDN thread Created by: Rob Thornley on 03-04-2012 06:04:00 PM Hi - this is my first posting on this forum so I hope it's in the right place.  Can you tell me if there is a way of programmatically changing the wallpape...

This document was generated from CDN thread Created by: jean louis le coz on 29-03-2012 06:26:55 PM Hi,is that someone has already worked on a project associating simultaneous translation and videoconferencingCan you tell me any informations about.Th...

This document was generated from CDN thread Created by: Randy Ott on 27-03-2012 07:46:57 PM Hi,    We want to use the 1080p4xS2 with the C40, and also use the camera as a room monitor.  We need to disconnect the HDMI input to the C40 during the room ...

This document was generated from CDN thread Created by: joaquim Fernandes on 27-03-2012 03:09:34 PM HI Team,I m new to Cisco Video and i have a query.I my question will definitely prove that i am new to Cisco Video.One of my customer have Cisco TeleP...

Subject: RE: Tandberg C40 + 3 PrecisionHD 1080p 12x Replied by: Jonas Tysso on 12-09-2012 10:01:04 AMHi Erwan,yes, you can daisy chain 3 cameras,Regards,JonasThis document was generated from CDN thread Created by: Babrer Erwan on 27-01-2012 04:55:01 ...

This document was generated from CDN thread Created by: Jignesh Parmar on 26-01-2012 04:43:42 AM HI All,I have Codec C60 having Two Cameras PrecisionHD1080p camera connected over UTP cables through Extron DVI201.when I switched On the codec i am not ...

This document was generated from CDN thread Created by: eagles wings on 26-01-2012 01:55:18 AM Hi! Just a quick question: How do we change account passwords on Movi? Or are we allowed to do that? Thanks!

This document was generated from CDN thread Created by: Elwin Witzke on 25-01-2012 11:31:28 PM We are trying to use an external camera on a tripod with our C40. Currently using a Canon XF100 via HDMI. It seems that the codec is not recognizing the si...

This document was generated from CDN thread Created by: Robert Crotts on 24-01-2012 08:18:06 PM While trying to connect to C40, receiving popp saying that SSH and Telnet not available to Host. Checked the settings on codec and verified SSH and TELNET...

This document was generated from CDN thread Created by: David Henderson on 24-01-2012 06:52:24 PM I am having an issue with low microphone input levels from one of my sites.  While looking through various settings, I came across "Experimental SetLowL...

This document was generated from CDN thread Created by: Zeeshan Latif on 20-01-2012 06:43:50 PM i required the Software Development Kit  (SDK) or SDK manual e.g MSComm1.Output = ???

This document was generated from CDN thread Created by: Chet Cronin on 20-01-2012 07:13:12 AM Need some assistance.  I have two MXP6000's and both are on the same network with IP's assigned five digits apart. Only difference is MXP's are on different...

This document was generated from CDN thread Created by: Mike Morgen on 26-03-2012 11:10:46 AM Hello all!Nowadays, I’m developing chat programs in C# using a sample program called Ozeki VoIP SIP SDK. Have you heard about it? I have found it during my ...

This document was generated from CDN thread Created by: Frederick Nielsen on 24-03-2012 04:36:09 PM I seem to remember hearing that this forum would be closing/migrating to Cisco Developer Network.. is that in the works?

This document was generated from CDN thread Created by: Andreas Watt on 23-03-2012 05:45:42 PM I have a C90 codec and a Crestron system. Had full control of unit until 2 weeks ago. Remote works perfectly FYI. Unit is 232 and confirmed that both 232 c...