Collaboration Knowledge Base

This document was generated from CDN thread Created by: Gignac Zacharie on 08-07-2011 04:11:51 PM Hi,I'm trying to figure out how to make a startup script for a C60.I Know that the script must be in /user/userscripts, and must have the execute permis...

This document was generated from CDN thread Created by: Melanie Caron on 08-07-2011 07:37:39 AM Hi guys,Encountered an issue the other day whilst installing a C40 with a Teleprescence touchpanel attached.Once installed, it had to be enabled with the ...

This document was generated from CDN thread Created by: Steve Babcock on 07-07-2011 05:55:07 PM Hello,I was reading an old posting on this site that said there was going to be a new revision of this camera at the end of Q1 2011. Are the SMPTE standar...

This document was generated from CDN thread Created by: Paulo Souza on 06-07-2011 09:20:39 PM Folks, please, we need your Help!We have a C40 Codec that is going to be installed in a meeting room. In this room, we have a BRCZ700 Sony camera, which was...

This document was generated from CDN thread Created by: GYSS Nicolas on 06-07-2011 06:10:19 PM Hello,I'm working on the C20 codec in the 4.1.2 firmware.In this version, when I try to reach the XML files by http://xxxx/getxml?location=/Status/Call, th...

This document was generated from CDN thread Created by: Victor Poriazov on 06-07-2011 01:11:09 AM When booking an exernal audio dial-out participant, I need the MCU to make a pause when dialing out in order to enter a PIN or extension number.E.g. I w...

This document was generated from CDN thread Created by: Jamie DeBiasi on 05-07-2011 02:17:27 PM I just performed a fresh install of TMS v13.  I'm receiving the following error.  Does anyone know what IIS issue is causing it?Description: An error occu...

This document was generated from CDN thread Created by: Matt Keenan on 04-07-2011 12:20:12 AM Hi,The setup is c40 Profile 42" with Dual Display and the HDMI port is cabled to an NEC projector. The standby timer is set to 5 minutes (the business requi...

This document was generated from CDN thread Created by: Emre Sumengen on 04-07-2011 12:01:55 AM Hi all,I have been working on a customer request for a few days (more like a week) and I believe I am in a dead-end. Any help or comments would really be ...

This document was generated from CDN thread Created by: Emre Sumengen on 03-07-2011 11:45:58 PM Hi,I'm Emre Sumengen, from Istanbul/Turkey.I work as a System Engineer for a local network integrator, Sekom. We have been partner to both Tandberg and Ci...

This document was generated from CDN thread Created by: payman zafar on 02-07-2011 12:46:02 PM I want to integrate an audio conference system with an Edge 95, and triger the camera preset whenever a user pushes his microphone to talk . The audio conf...

This document was generated from CDN thread Created by: payman zafar on 02-07-2011 12:08:42 PM I want to connect a 3rd party HD camera (Like Panasonic AW-H50 or Sony Z330) to an MXP codec (Like 3000 MXP or Edge 95). I do not want the codec to control...

This document was generated from CDN thread Created by: Bo Wang on 01-07-2011 07:41:59 PM hi,All,I met a promblem that I had no much licenses for non-traversal call . So I set the default call of 80 C20s as SIP. Now I can hold a conference within 50 ...

This document was generated from CDN thread Created by: Randy Ott on 30-06-2011 10:54:23 PM Hi,     Does the configuration file contain the "netdtrpulses  on"  initialization on startup?  ThanksRandySubject: RE: For dialing - configuration info - net...

This document was generated from CDN thread Created by: Martin Menard on 30-06-2011 10:41:04 PM Good afternoon,I seem to be having an issue with direct camera control.The setup is this:  1080p Camera, directly on the COM port of a Crestron PRO2.  I h...