Collaboration Knowledge Base

This document was generated from CDN thread Created by: kayrat Ahmetov on 31-03-2011 08:39:50 AM Please help!How can I find documentation, how to make url request to E20, to make it dial a number (integrating with Snom Vision)Subject: RE: Webrequest ...

This document was generated from CDN thread Created by: Vadim Tsai on 30-03-2011 10:48:05 PM Hello.I plan to use C40 with 2 PrecisionHD 1080p 12x cameras and 15 microphones. Crestron controller will manage the cameras, positioning a single camera at ...

This document was generated from CDN thread Created by: Vadim Tsai on 30-03-2011 10:44:24 PM Hello. I plan to use C40 with 2 PrecisionHD 1080p 12x cameras and 15 microphones. Crestron controller will manage the cameras, positioning a single camera at...

This document was generated from CDN thread Created by: Joseph Lewis on 30-03-2011 10:11:36 PM I am a novice.  I want to control a C20 using a Crestron QM-RMC.  My questions are these.1. Can I do this?  The C20 has one serial port with 12VDC on pin 4...

This document was generated from CDN thread Created by: Amlesh Sengar on 30-03-2011 09:05:31 PM hi,     i am facing issues with the audio of the call setup from mxp 95 unit. Sometimes voice is not heard at the other end when i speak and  sometimes vo...

This document was generated from CDN thread Created by: Z B on 30-03-2011 06:23:44 PM Hello,I've got several systems that use your MXP Duet module.  Some older installs are version 1.x, and some of the newer installs use version 2.x.The module update...

This document was generated from CDN thread Created by: Phil Gorman on 30-03-2011 01:56:58 PM Hi,I'm using the AMX Duet Module but I having problems with the MSG_PROMPT response.  It does not appear to be send a id from the Duet Module and so the use...

This document was generated from CDN thread Created by: PREM KUMAR on 30-03-2011 09:34:51 AM Dear All,We have 12nos 6000MXP interfaced with AMX control System.We made the Phone book page in the AMX touch screen to retrive the Data from the address bo...

This document was generated from CDN thread Created by: Alexandre Lopez on 29-03-2011 12:32:02 PM Hello,Is there going to be any development for TC Console not to be Active X based? In some environments it's really difficult to run Active X because o...

This document was generated from CDN thread Created by: Russ Noble on 28-03-2011 08:47:02 PM I'm looking for an alternate method of transversing data across networks during video conference sessions.  We currently use a segment (VLAN) of the network ...

This document was generated from CDN thread Created by: mohammed bakr on 27-03-2011 07:50:17 PM hello , can i combine the 2 HD camera input into a single feed as a main video , so i can use the presentation (PC) as H329 or duo video .  using TC conso...

This document was generated from CDN thread Created by: Ryan Espedido on 26-03-2011 01:27:15 PM Hi everyone,I'm new to TANDBERG codec equipments. Hoping you can help out.We've tried to setup a 4-way multisite call using C60 as initiator/host of the c...

This document was generated from CDN thread Created by: Justin Myers on 24-03-2011 09:37:42 PM Within the API, I see you can query the current state of most toggles, such as "xStatus audio microphones mute".  I noticed you can start and stop Presenta...

This document was generated from CDN thread Created by: carl scott on 24-03-2011 02:48:53 PM Hi everyone we have a c40 which is fantastic and is used by our R&D team for collaboration no problem there, they only use the device normally in the late mo...

This document was generated from CDN thread Created by: Arne Kampesæter on 24-03-2011 09:46:52 AM I`ve just updated my C60 to 4.1.0 and after some fiddling it now seems to communicate with other codecs. But I can`t connect to it using either http or ...