Collaboration Knowledge Base

This document was generated from CDN thread Created by: Erik Nordgaard on 12-01-2011 10:25:01 PM HelloI am trying to integrate a Codian MCU 4501 with a Crestron controller. Posting messages to the MCU seems to work but I always get the same fault mes...

This document was generated from CDN thread Created by: Marcus Newnam on 12-01-2011 06:10:12 PM For the C90/C60/C40 is there a way to list the disconnect cause code values?  The MXP provides the option http://<ip-address>/causecd.htm to list the code...

This document was generated from CDN thread Created by: Rachid . on 12-01-2011 03:43:06 PM Changing the settings xConfiguration Video AllowWebSnapshots to On is not possible.This is only possible when one is on-site with the unit.This can be quite an...

This document was generated from CDN thread Created by: Jayakrishnan Rajagopal on 12-01-2011 09:14:11 AM Hi , We are developing an application which integrates C60 Codec(TC4.0.0.235115)  with Cisco DMP and DIDO(For rotating the video for portrait mod...

This document was generated from CDN thread Created by: Andrew Fedder on 07-01-2011 09:11:50 PM Hello, I am trying to control 4 of these cameras via an RS-232 controller with mixed results.  I can pan, tilt, zoom just fine.  All seemed ok until I att...

This document was generated from CDN thread Created by: Jonathan Koch on 06-01-2011 12:43:30 PM Hi,Is it at all possible to dial into a Precision HD 1080p camera via ip through Roomview Express for monitoring?Subject: RE: Displaying Precision HD 1080...

This document was generated from CDN thread Created by: Cristiano Alcantara on 05-01-2011 05:02:43 PM Dears,I need access to the CODEC MXP 95 in browser for configuration and management, but can´t access, is there a login (user) standard and password...

This document was generated from CDN thread Created by: Matias Schwartz on 04-01-2011 06:09:53 PM I have three questions to ask: 1) how do I logout in a telnet session from a C20? 2) I can change the message on the screen when I try to make a problem...

This document was generated from CDN thread Created by: Rachid . on 04-01-2011 04:28:08 PM I am trying to enable the root user on TC4, but I can't get it to work.I've tried the commands systemtools rootsettings on and systemtools rootsettings on mypa...

This document was generated from CDN thread Created by: David Anstee on 04-01-2011 11:06:53 AM Is there a list of ALL exceptions of TMS API? An exhaustive list?ThanksSubject: RE: TMS API Exceptions Replied by: Torgeir Johansen on 06-01-2011 08:45:52 ...

This document was generated from CDN thread Created by: Francis Beausoleil on 30-12-2010 07:42:43 PM Good day to you all,                               I was wondering if there is somthing in the works to be able to start or participate in a webex me...

This document was generated from CDN thread Created by: Francis Beausoleil on 30-12-2010 07:08:31 PM Good day to you all,                           I hope you are had a nice Christmas and I wish you happy New Year !                           I'm work...

This document was generated from CDN thread Created by: Spenser P on 29-12-2010 10:34:34 AM I have configured LDAP in Content server for users Authentication. After configuring LDAP we are not able to login into content server with either domain acco...

This document was generated from CDN thread Created by: Rob Husband on 22-12-2010 11:23:58 AM HelloCrestron's latest firmware release has changed the way in which the WAIT statement works. The company I work for has been in conversation with Crestron...

This document was generated from CDN thread Created by: david kerr on 21-12-2010 02:51:29 PM hello all, i am currently using a C60 codec, configured with 2 Displays. I have enabled the dual screen selfview.Once i initiate a call, Display 2 (set to se...