Collaboration Knowledge Base

This document was generated from CDN thread Created by: Francois MUNIER on 02-02-2011 06:49:58 PM Hi all,I'm looking for informations to setup GPIO on C60/C90 codecs.Which firmware, which possibilities ?Thanks for future answer.RegardsSubject: RE: GP...

This document was generated from CDN thread Created by: Dan Capehart on 02-02-2011 06:35:13 PM I am working with JELD-WEN to help implement a video conference system.  We currently have 3 C20s and 1 C60 in operation with an additional C60 install pla...

This document was generated from CDN thread Created by: Jorg Jenni on 02-02-2011 09:39:13 AM My company is developing an "external booking systems" and therefore we plan to integrate with TMS. The TMS is deployed in our customers environment but we d...

This document was generated from CDN thread Created by: Rajesh Vargheese on 01-02-2011 12:13:33 AM Had a question on the TC4.0 change. Looks like the authentication is being enforced in 4.0 for any http api call in TC4.0 on EX90.  Did not see this TC...

This document was generated from CDN thread Created by: Bob Fitzgerald on 01-02-2011 12:07:05 AM Hey there everyone!A customer of ours is trying to set layouts for the Composite output of their C60.  They have tried using a couple of commands;xComman...

This document was generated from CDN thread Created by: Justin Ferello on 31-01-2011 04:15:52 PM On a C series codec, if I have a 'Y' cable can I get a digital DVI signal & RGBHV signal out of that DVI port at the same time?Thanks,JustinSubject: RE: ...

Subject: RE: Does HDMI over UTP transmiter work with Tandberg presicion 1080p 60 fps Replied by: Oleksandr Yurchenko on 18-09-2012 03:34:05 AMHi RogerCan you recommend other additional HDMI extender  for PHD-1080p ? I tried using Kramer PT571/572. Bu...

This document was generated from CDN thread Created by: Dave Goldberg on 30-01-2011 05:52:49 AM The customer has 2 Tandberg HD cams connected into his C60.  I am trying to give him a camera preview on his touch panel.  I am trying to do this by hooki...

This document was generated from CDN thread Created by: Morten Brudvik on 28-01-2011 04:31:38 PM I am currently integrating with Tandberg 6000 and need to know what API command(s) to call to get the same functionality as the Presentation button on th...

This document was generated from CDN thread Created by: Rolando Lozano on 26-01-2011 06:57:30 PM Hi,is there any SNMP mib to be able to control the message display?like the equivalent to the xCommand Message Display Text:if there is one, how can i ge...

This document was generated from CDN thread Created by: Cameron Davidson on 26-01-2011 05:32:49 PM HiI am having problems trying to use the Cisco TC console app on your web site.It logs on to the C90 codec but an error comes up after please see attac...

This document was generated from CDN thread Created by: Stefan Petrov on 26-01-2011 02:12:02 PM Hi to all, first of all that's a great forum, congrats!I'm trying to make a SIP call between edge95, 1700MXP and e20, using cisco UC500 for a registrater....

This document was generated from CDN thread Created by: Jayakrishnan Rajagopal on 26-01-2011 07:09:41 AM Hi, We are using a C60 Codec with camera in one end (TC4.0 Software) and on the other end isthe EX90 with Camera. I am about to write some basic ...

This document was generated from CDN thread Created by: Rolando Lozano on 25-01-2011 08:37:35 PM Hi,I need to send a command to the tandberg  C20 via SSH in an automatic way to display a message:ssh admin@192.168.101.2 xCommand Message Alert Display ...

This document was generated from CDN thread Created by: John Blowers on 25-01-2011 04:53:47 PM We've installed 6 MXP 3000 codecs for a client over the past 6 months. 2 were installed 6 months ago and 4 were installed 3 months ago. All of the MXP's ar...