04-02-2016 02:47 PM - edited 03-14-2019 03:55 PM
We recently installed SIP Dialer at UCCE 10.5 (2), with Predictive Only simple campaign mode. During testing, we found that Dialers is configured to dial to two lines per agent. 1st call gets connected, however 2nd call being dropped since no 2nd agent available to take that call.
Client wants to queue 2nd call, and delivered when agent available.
Can second call be queued through MR to CVP Translation and Queue to skill group node?
Any thought, if this is supported solution?
Syed
04-03-2016 03:16 AM
you can queue the second call.
you can send the call to VRU campaign with the campaign configuration and queue the call to same or different skill.but the call will become inbound.
09-09-2016 10:58 PM
Hi Chintan,
Can you the flow and configuration please? Also let me know if we can do it for Preview Campaign as well or not?
I am trying for preview in my lab setup. Campaign config attached for your reference.
As per cisco outbound guide, i have created 4444 CTIRoute point, which I have used as DN for transfer to IVR campaign.
It would be great if you share your config as well.
Please let me know which particular logs i have to check as well.
Regards,
Sadashiv
09-12-2016 01:43 AM
Hii,
What type of dialer you are using, SCCP or SIP?
09-12-2016 05:41 AM
09-12-2016 06:24 AM
Have you read the outbound option guide for CCE?
fo SIP dialer and for transfer to IVR, you cant create CTI RP.
you need to create a Dialed Number on MR PG for the SIP dialer peripheral, and map that DN in your campaign for IVR transfers.
Attach a script to that DN which utilizes the translation route mechanism to transfer calls from Dialer Peripheral to CVP or IP IVR.
Successful implementation depends on successful achievement of Translation Routing between MR PIM and CVP/IVR.
09-19-2016 10:50 PM
Yes, its working fine now. Please let me know if we can configure for preview campaign as well or not?
09-20-2016 08:21 AM
Transfer to IVR campaign is not supported for Preview and Direct Preview.
I am pretty much sure it will not work for Direct preview since calls will be dialed out from agent phone and agent has to deal with CPA and all other stuffs.
But try configuring it with preview and see if it works, you don't have to deal with lot more config, just have to change the skill group mode in admin script.
06-05-2018 03:18 PM
06-05-2018 07:58 PM
This is an agent campaign, correct? You can display BAAccountNumber in Finesse, assuming you're importing it
06-06-2018 10:27 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide