01-08-2016 04:17 AM - edited 03-14-2019 03:37 PM
My agents are getting this message rather often when trying to change state from Ready <--> Not Ready (their status changes in the background but the message pops regardless)
Same thing when making changes to the Finesse Administrator, windows wont load and leave the following message:
The operation timed out or failed. Please try again or contact the administrator.
Any idea on how to approach this?
01-08-2016 06:30 AM
Do u have a screenshot of this, Does this happen every time thery try to change the status or any abnormalities found in their phones??
Thx,
M
01-08-2016 09:58 AM
01-10-2016 08:55 AM
What is the version, Have u checked the Up time of Notification service.
Can you send me logs from RTMT for that particular time frame.
01-11-2016 05:22 AM
Notification Service is IN SERVICE for 32 days
Version is 10.6.1.10000-39
Any specific logs?
01-11-2016 05:50 AM
Im digging through some stuff in the logs I see and Im seeing this which looks odd
2016.01.09 09:44:03 Error or result packet could not be delivered <iq type="result" id="etweBnw+KQCukF732Q7WuJ+JoNg=" from="pubsub.svr-uccx.pos.local" to="filipe@svr-uccx.pos.local/desktop"/>
2016.01.09 09:46:47 Error or result packet could not be delivered <iq type="result" id="RmxITKmTrxL3huYdJQ+D8p6fWI4=" from="pubsub.svr-uccx.pos.local" to="jstroinski@svr-uccx.pos.local/desktop"/>
And stuff like this
2016.01.05 15:08:08 Pending elements reached its threshold - 50 for session 5485b6f, JID - filipe@svr-uccx.pos.local/desktop
2016.01.05 15:08:08 Pending elements reached its threshold - 50 for session 5485b6f, JID - filipe@svr-uccx.pos.local/desktop
2016.01.05 15:08:08 Pending elements reached its threshold - 50 for session 5485b6f, JID - filipe@svr-uccx.pos.local/desktop
2016.01.05 15:08:08 Pending elements reached its threshold - 50 for session 5485b6f, JID - filipe@svr-uccx.pos.local/desktop
2016.01.05 15:08:08 Pending elements reached its threshold - 50 for session 5485b6f, JID - filipe@svr-uccx.pos.local/desktop
And
2016.01.10 08:27:24 Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
2016.01.10 08:27:24 Going to buffer response body of large or unknown size. Using getResponseBodyAsStream instead is recommended.
01-25-2016 10:24 AM
Turns out it was an incorrectly configured DNS on the UCCX box. Changed it, rehosted my licenses and all is good to go :)
04-07-2016 12:09 AM
We have the same issue encountered, is there somewhere in the UCCX or Finesse logs which indicate this ?
04-07-2016 06:20 AM
Not that I know of unfortunately.
It was the reverse DNS that was missing as well. Forward DNS was set up and the DNS servers on the UCCX were improperly set up.
Verify your settings and go from there.
04-11-2016 12:33 PM
Always Make sure you configured UCCX Hostname in lowercase ..)
04-11-2016 06:48 PM
We managed to investigate further and its not the DNS settings :)
Its that specific Dynamics page which is not iFrame-friendly, Partner has developed a gadget (screenpop gadget) calling a URL with call variables but its not behaving well as compared to running it directly in a Browser itself.
Anyway, we might have to use an alternative method calling an intermediary web form which in turn screen pop the detailed Dynamics Caller Profile page. Tried and tested in another customer site.
09-21-2017 06:19 AM
I Have the same problem in PCCE with Finesse 11.5, could anyone help
07-30-2018 10:09 AM
Hi,
I am having the same problem whit PCCE 9, did you find out the reason why of this nessages?
Regards!
02-20-2024 03:35 AM
Dear Alagappan,
I am using the Cisco UCCX V-11.5 and I had the same problem faced by the agent. I did the following and resolved the issue.
- Click on end of shift (if it worked), but I am sure it will not work.
- Press control + H (it will take you to the browser's history), delete your browser history
I am sure it will work, if still not fixed it then do and apply the following commands
- go to run & type cmd (type: ipconfig/release
- again press ipconfig/renew
- unplug the ethernet cable from the Cisco IP Phone & re-plug it back after 10 Sec
- Now login back to your Cisco Finesse Server link(Web Portal).
You will see the normal Cisco Agent page with all settings available
07-11-2019 04:39 PM
Just adding another possible resolution to this, if you haven't restarted the Finesse Tomcat service since activating it, you may experience these timeout errors.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide