Industrial Networking

IE4000 (or Stratix 5400) user question:  Has anyone successfully made VTP version 3 (or v2) work over a PRP interface?   Debug sw-vlan * seems to show the VTP library transmitting VTP on the PR1 meta-interface instead of the underlying physical inter...

Hello All,I tried to configure REP and PRP on IE 4010 switch. But I can't find the commands suggested in the documentation under the interface.License Level: lanbaseSW Version: 15.2(8)E1Commands Not Supported: switch(config-if)# prp-channel-group 1 S...

The IE3300 is having problems not dropping frames when two Basler Cameras are connected to it. The competitive Fortinet switch is able to when Flow Control is set to TX, why can't we set it to TX on the IE3300? Or how can we configure the IE3300 to s...

Hello CommunityI am trying to disable the USB Ports on the Rugged Switch IE-3300-8T2S.I wonder if that is even possible, since the only command I found "platform usb disable", does not work.The command above I found in description for IOS XE Version ...

I have been working with Wireless temperature sensor module to detect the temperature of machinery system used in industry but now we are trying to connect the system via internet cloud to store the embedded values of the temperature sensor using fir...

Hi,I'm updating an IE4010 from 15.2(8)E1 to the most recent stable version 15.2(8)E5Im wondering do I need to update firmware by firmware or is it safe to skip a firmware version?There isnt an official upgrade path that I can find to confirm, Thanks ...

We have 1000's of CGR 2010s in service, but now seeing the IR1101 in some roles. We have policy-firewall on both platforms.To see sessions on CGR, I use:  show policy-firewall session | inc Session  <to filter out the uptime and bytes details.On the ...

Hello colleagues! Have a question tonight.  As far as you know there are 2 industrial vendors who work on Cisco IOS: Cisco and Rockwell (Allen Breadly) , the major difference is colour schema. Imagine a project state  situation (which I actually got)...

XXXX-rtr01(config-controller)#$ lte modem band-select all-lte-only slot 0 The "all-lte-only" option is not applicable to this modem type. This command is used and works for 4G LTE modules, we also had an early R&D P-5GS6-GL module from Cisco that wor...

Good day, I'm a university student running a simulator project for my semester.Here's the problems I needed to help desperately:1. Smartphone receive the email successfully, but it doesn't show up.2. Lawn sprinkle shows "No remote control API"

Hello,I'm trying to deploy a P-LPWA-900 LoRaWAN gateway module on an IR1011.  To connect it to AWS, two certs need to be installed.On an IXM, there is a cert install command to be able to do this.  Is there an equivalent command to be able to do this...