I have made a factory reset on a 7962 and now is stucked on the upgrading screen, but i need to input the tftp manually but i cant access the menu.
Any toughts on how can i access the menu?
Solved! Go to Solution.
You cannot manualy set tftp (or anything else) on a phone that has been reset.
You will need your dhcp server to supply the correct tftp addres. There is no alternative.
You cannot manualy set tftp (or anything else) on a phone that has been reset.
You will need your dhcp server to supply the correct tftp addres. There is no alternative.
If you search the forum you will many posts that already address similar issue...
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson
Rafael,
Here are the very good posts with similar issues..
https://supportforums.cisco.com/message/3661272#3661272
https://supportforums.cisco.com/message/3715072#3715072
https://supportforums.cisco.com/message/3692756#3692756
Please rate all useful posts
"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson