06-27-2018 07:57 PM - edited 03-17-2019 01:06 PM
Hi,
Is there a way to identify analog number which is connected to fxo from the voice router
Thanks
06-27-2018 10:21 PM
you should have a dial-peer with a destination pattern pointing to a physical fxs port on your voice gateway.
send config if you want and we can point it out.
(or is this an MGCP controlled FXS card?)
06-28-2018 01:38 AM
Hi,
here is the conf
voice-port 1/0/0
timing hookflash-out 50
connection plar opx 8200
bearer-cap Speech
!
voice-port 1/0/1
timing hookflash-out 50
connection plar opx 8333
!
voice-port 1/0/2
timing hookflash-out 50
connection plar opx 8200
!
voice-port 1/0/3
timing hookflash-out 50
connection plar opx 8201
!
voice-port 1/0:15
bearer-cap Speech
!
!
no mgcp package-capability res-package
no mgcp package-capability fxr-package
!
!
!
dial-peer voice 1001 pots
destination-pattern 001T
port 1/0/1
prefix 00
!
dial-peer voice 1002 pots
destination-pattern 002T
port 1/0/2
prefix 00
!
dial-peer voice 1003 pots
destination-pattern 003T
port 1/0/3
prefix 00
Thanks
06-28-2018 07:33 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide