identify fxo ports

[bluesea2010]

Hi,

Is there a way to identify  analog number  which is connected to fxo from the voice router 

Thanks 

[Dennis Mink]

you should have a dial-peer with a destination pattern pointing to a physical fxs port on your voice gateway.

send config if you want and we can point it out.

(or is this an MGCP controlled FXS card?)

[bluesea2010]

Hi,

here is the conf 

voice-port 1/0/0
timing hookflash-out 50
connection plar opx 8200
bearer-cap Speech
!
voice-port 1/0/1
timing hookflash-out 50
connection plar opx 8333
!
voice-port 1/0/2
timing hookflash-out 50
connection plar opx 8200
!
voice-port 1/0/3
timing hookflash-out 50
connection plar opx 8201
!
voice-port 1/0:15
bearer-cap Speech
!
!
no mgcp package-capability res-package
no mgcp package-capability fxr-package
!
!
!
dial-peer voice 1001 pots
destination-pattern 001T
port 1/0/1
prefix 00
!
dial-peer voice 1002 pots
destination-pattern 002T
port 1/0/2
prefix 00
!
dial-peer voice 1003 pots
destination-pattern 003T
port 1/0/3
prefix 00

Thanks 

[R0g22]

Slot numbering goes like - Slot/Subslot/Port. This card is in 1/0 >> 1 is the slot, 0 is the subslot. Check with "show inventory" to see what card in those specific slots/subslots.
From the config, this looks to be a FXO card.