09-24-2013 07:08 AM - edited 03-16-2019 07:31 PM
Hi Voice team, i change the CUCM on my company to version 9.1.
I had to change the ip address, the problem is that now I have more than 100 ip communicator, how do I dynamically change the TFTP address that is registered?
Thanks,
Thiago
Solved! Go to Solution.
09-24-2013 08:02 AM
Hi.
The windows registry key mentioned by Chris is HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems Inc.\Communicator
TFTPServer1 (the ip address is written in decimal or hexadecimal)
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-24-2013 10:15 AM
tftfp1: 56022f0a
tftp2: 57022f0a
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 07:55 AM
It is stored in the registry, so if you can push the registry update it would be the easiest, assuming you are not using default and pulling it from DHCP scope.
HTH,
Chris
09-24-2013 08:02 AM
Hi.
The windows registry key mentioned by Chris is HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems Inc.\Communicator
TFTPServer1 (the ip address is written in decimal or hexadecimal)
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-24-2013 09:13 AM
Just to add to excellent suggestions by Chris and Carlo (+5 guys), the hexadecimal values is read backwards..
eg..here is the hex value of my tftp server in the registry
e01fa8c0
e0=224
1f=31
a8=168
c0=192
so the ip will be
192.168.31.224
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 09:21 AM
I found this parameter in hex, but how I put the IP of the new CUCM?
Thanks,
09-24-2013 09:26 AM
You need to convert your ip to hexadecimal...You can use this link to convert hex to dec or dec to hex
http://www.statman.info/conversions/hexadecimal.html
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 09:32 AM
I made the conversion from my new ip 1047286 and the hex is ffaf6, i put on TFTP parameter, but the ip communicator
did not change the address.
09-24-2013 09:35 AM
That conversion is wrong..can you confirm that your ip address is 10.4.72.86? I will do the conversion for you
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 09:38 AM
the ip address is 10.47.2.86 TFTP1 and 10.47.2.87 TFTP2
Thanks,
09-24-2013 10:15 AM
tftfp1: 56022f0a
tftp2: 57022f0a
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 10:18 AM
Thanks, after put this,i need to reboot my windows?
09-24-2013 10:19 AM
Not really..I am running Windows 7 and I didnt need to restart my mahcine. Ensure you exit the IP communicator and start it again, if it doesnt still work, try and restart it
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 10:31 AM
It works only on TFTP 2, on TFTP 1 still the old ip address on IP communicator
09-24-2013 10:39 AM
Ensure you have entered it correctly...If it works on one, it has to work on the other--or restart the pc
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-24-2013 10:40 AM
Thanks a lot voice team.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide