06-28-2019 06:35 AM
Dear Cisco Community,
I have a Cisco 7962 Phone. This phone presently has two extensions associated with it. On one extension, when External Caller calls then call directly goes to the Voicemail instead of the Phone ringing. But when a Internal Caller Calls using a Cisco phone then it works fine.
However, the calls from External Callers on the second extension on the same phone are working fine.
Kindly advise how to trouble this issue at the earliest.
Regards,
Vik.
06-28-2019 06:41 AM
In CUCM admin check the call forward internal/external settings. CUCM > Device > Phone > find phone > click DN > Call Forward and Call Pickup Settings.
Brandon
07-01-2019 03:10 PM
Dear Brandon,
I have checked the related setting but all the settings are correct and i am tallyed them with other related DN numbers on which on it is working fine.
Regards,
Vik.
07-01-2019 03:15 PM
Dear Brandon,
I have checked the related setting but all the settings are correct and i am tallyed them with other related DN numbers on which on it is working fine.
Regards,
Vik.
07-01-2019 07:49 PM
Hi,
Can you check if there is same DN in different partition matching with higher priority? You can check it under Call Routing >> Route Plan Report
07-02-2019 07:29 AM
I could not find anything there as it exists just under one Partition.
07-02-2019 08:20 AM
Here is another similar issue. Have you checked this:
07-02-2019 11:09 AM
Dear Vaijanath,
The Partition is configured correctly on this DN.
Also i checked the configuration of this DN with another DN on which the external calls are being received perfectly fine.
07-05-2019 02:34 AM
As a test, give non-working DN to some other phone (hard and soft) and check if you can reproduce the issue or it gets solved.
07-05-2019 06:51 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide