05-10-2013 01:19 AM - edited 03-16-2019 05:15 PM
Hi
Where can i find list of SEP<MAC>.cnf.xml files in CUCM.
I have tried tftp <CUCMIP> get SEP<MAC>.cnf.xml in CMD. but this gives only the output of that MAC address.
is there any option to find the list of all SEP<MAC>.cnf.xml file in CUCM?
thanks in advance.
Solved! Go to Solution.
05-13-2013 02:46 PM
Paolo,
Ah, ok. In that case, you cannot get the list of the files since starting CUCM 5.x, they are not stored on the HDD. They are present on RAM and can only be fetched one by one using TFTP or HTTP.
Hope that helps.
Regrads,
Jagpreet
05-15-2013 11:58 AM
I was able to list our lab devices on 7.1 using a browser, http not https, on port 6970:
http://172.28.22.10:6970/ConfigFileCacheList.txt
It only worked with firefox though, and no idea if this carries forward or backwards..
Mary Beth
05-11-2013 04:52 AM
Beside obtaining system internal lists, what practical problem are you trying to solve ?
05-13-2013 10:39 PM
Hi Paolo, the issue is few of the IP phones is not listing the directory option in the menu. this is happeing only for newly registred phones and to the IP communicator which is registered via VPN.
its looks like the phones are getting regisred with default.XML files. Hence i would like to check the SEP.cnf.xml file is avalaible in the DB.
Jagpreet , thank for you input.
Solution : i have restarted the TFTP services from the CUCM and now the issue has resolved.
12-09-2013 10:17 PM
Sigeesh,
Your phones are not seeing corporate directory option? Or no directory
(Placed calls, missed...)
Are the phones on current firmware (match device default setting ) or on older version and not upgrading?
Try to delete ITL/ctl as a start. Might be sbd related issue on the phones.
Sent from Cisco Technical Support iPhone App
12-10-2013 12:35 AM
Hi
thanks for your inputs.
My issue got resolved after restarting the TFTP service.
05-11-2013 06:22 PM
Hi Siqeesh,
Please run : tftp -i
In case TFTP is not allowed on your windows PC, you can turn it on from the Control pannel under Turns Windows features on or off.
Regards,
Jagpreet
05-11-2013 08:44 PM
Jagpreet Singh wrote:
Hi Siqeesh,
Please run : tftp -i
get SEP .cnf.xml In case TFTP is not allowed on your windows PC, you can turn it on from the Control pannel under Turns Windows features on or off.
Maybe read above again:
OP is looking for a list, not a single file.
05-13-2013 02:46 PM
Paolo,
Ah, ok. In that case, you cannot get the list of the files since starting CUCM 5.x, they are not stored on the HDD. They are present on RAM and can only be fetched one by one using TFTP or HTTP.
Hope that helps.
Regrads,
Jagpreet
09-25-2013 09:41 AM
Hi
Does the CUCM allow to upload
or only download ?
Regds
$
09-25-2013 03:15 PM
No you cant upload MAC address to this cache list. The only way to upload mac is vvia BAT or CUCM admin
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
05-15-2013 11:58 AM
I was able to list our lab devices on 7.1 using a browser, http not https, on port 6970:
http://172.28.22.10:6970/ConfigFileCacheList.txt
It only worked with firefox though, and no idea if this carries forward or backwards..
Mary Beth
05-15-2013 10:18 PM
yes, it works in my CUCM. thanks a lot..
12-09-2013 01:37 PM
Guys,
I am able to run this http://172.28.22.10:6970/ConfigFileCacheList.txt
But Not able to see the config of the phone..
any other option ?
ps : TFTP is not a possible option for me right now ..
Regards,
12-09-2013 09:30 PM
Hi Philippe
try the below in CMD.
tftp -i
12-10-2013 10:15 AM
I have try that, the file is not found.
I also try in CLI from CUCM.. it cant find the file.. weird
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide