Network Access Control

Dears,How to make WLC Receive PoD (Packet of Disconnect) from the RADIUS server to terminate the session and disconnect authenticating clients.Thanks,

Hi all,i have a single SSID with local and flex APs and I am struggling to ensure that local mode APs match AuthZ policy 1 and flex APs match AuthZ policy 2.it seems that upon initial authorisation, the ISE picks AuthZ policy 2 but then during CoA, i...

Hii config radius in the ASA and also i set interim update for sending start stop updates toward radius client . i got a debug command on the asa   but i didn't see any update in the output file.thanksdynamic-access-policy-record DfltAccessPolicyaaa-...

Hi.I want to use encryption for guest access. In order to use the "RADIUS-NAC" in the WLC, you can not use or "Open + MAC" only "WPA + dot1". (Specification of the WLC)  When the "Open + MAC", return from the ISE at the time of the "Web Authenticatio...

vmware 4.1 (or maybe 4.0.1)configured with 2 core minimum freq 3.6Ghz200Gb HD on single physical drive (minimum requirement), no thin provisioningdatastore vmfs 3, 2Mb block size,ethernet : flexible network adapterram 4GbScsi controllersetup......bum...

The ISE External RESTful Service API says that the endpoint registration request should have an Accept header, but the example given uses a Content-Type header.  When I try to use an Accept header, I get a Resource media type exception titled "Wrong ...

Hello Cisco Community,I am using a Cisco 2901 as a Terminal Server with ASYNC Ports. And running Windows NPS for Radius Authentication. I have two users ADMIN and VENDOR. The ADMIN user has full access to all ASYNC ports but what  the VENDOR user to ...

Hello all,I am trying to use RADIUS authentication for Brocade SAN switches, specifically the HP AJ821A switch for the c-class blade enclosure.SAN switch configuration is:aaaconfig --add 10.180.250.222 -conf radius -s sharedsecret -a peap-mschapv2aaa...

Hello :-)I want to implement ISE 1.2.We have a database of mac-addresses and their description (for example the phone with the Mac address, John).When connecting the phone John to a wifi network, WLC checks its mac-address in the database and allows ...

Hi,In our network, We have 3 ACS in a cluster. There is integration between ACS and AD. The devices are administered through AD accounts. If one of our ACS server loses connection with AD, the requests are not getting failover to secondary ACS. since...

Hi, I have an authentication problem with load balancers and ACS 4.2 (1) build 15 patch 4. The load balancers don't register as a fail or pass on the ACS.I've made an account called aceadmin, and it has unrestricted level 15 commands and it's own she...