Network Access Control

Dears,I have ipad and authenticate from ISE. In our company someone is hacker  and have the same model of ipad and put my ipad mac address in his ipad. Can he connect to network?? He also know the username and password.How ISE identify the hacker ipa...

    we have a ISE 1.2 and WLC 7.0.118 ,cannot upgrade to 7.2 to support BYOD.I have configured PEAP with MS CHAP I am not sure if certificate provisioning would be supported on this version of WLC. On the I Phones I do not find the option to use PEAP...

Hi !A customer uses Active Directory where some group names contain special characters (ç ~ '^). The Cisco ACS 5.2 is presenting the warnings: "Not all Active Directory user groups are retrieved successfully. One or more of thegroup's canonical name ...

Hi Cisco Community,I have a question about Cisco ACS 5.3.0.I like to check Certificates for WLAN users.Currently I use mashine certificates to autheticate my notebooks trying to enter my corporate WLAN.Now we like to also autheticate user Iphones and...

I have a few questions about AD integration of the ACS 5.2 server:The ACS server documentation states the following:"You must enter the username and password credentials in the ACS 5.2 configuration for ACS to join and communicate with the AD domain....

Hi everyone!I'm trying to implement ISE to authenticate a wireless network using a cisco WLC 5508, I have an ISE virtual Appliance version 1.2  and a WLC 5508 version 7.6 with several 3602e Access Points (20 aproximately).Right now they are authentic...

Hi, we configured most of the switches interfaces with Dot1X, it was working fine, now we need to change some of the ports back to port security, once we enable the port security the user will be disconnected from the network.If we make it a normal p...

I begin setup ASA 5510 and create DMZ, succesfull add our proxy to DMZ and all works fine, now i want to add one more server to DMZ.I add NAT and set our free external ip to it all works fine, but when i turn off networks cable from server, left only...

Hello,We are currently running ACS 5.4 for 802.1x authentication and everything is functioning well.  We authenticate by computer & user, but currently machine authentication is not enforced for user authentication.  This results in the occasional si...

I know this is something basic in configuring the ISE, but I'm really desperate. I have reviewed documents, videos and cann't find what is going on.Annex AuthZ and AuthC rules (I enabled Policy Sets), profiles used for Wireless,RADIUS detail of a con...