Network Access Control

Hi all!I have a problem with ACS 4.2.0.124 for Windows.I set the logging parameters in the "System Configuration --> Logging --> Passed Authentication" menu as the following:- Log to CSV Passed Authentications report is checked- Generate New File: Ev...

Hello, When I create a user in the ACS 5.0 for VPN authentication, I don't find the same functionalities as the Version 4.2.I want to know how can I assign IP addresses for my users (ACS 5.0).Please view the Attached file (With ACS V4.2 I tested that...

Hi,I would like to ask if this is already a known issue with ACS 4.0 wherein a page cannot be displayed error appears every time the client clicked the submit button after a they change somthing on the configuration. Thanks.Regards,Greg

HiI am running ACS 4.0 on a windows 2000 server.I have created a backup using the GUI and attempted to restore it on a new server. It only pulls through the Users and groups which seems correct as is reported all over the internet.The server has the ...

I have configured accountng commands but the Cisco ACS doesn't show any reports on Command accounting(as well i upgraded tolatest version for ACS (Windows) is 4.2.0.124 Patch 11.

Hi,we are getting the below mentioned lines frequently for one of the network device in my TACACS failed login report. not sure wht exact it mean. can some one pls help me to understand the attached log.

I'd like to use ACS 4.2 working with win2008 HCAP, but on ACS does not show "Microsoft Network Access Protection" in the "Interface Configuration> Advanced Options>...",there should be any protocol or any where to enable first, please advise.

Hello,I have configured 802.1x in a wired network and this work ok, but my problem is that my IP Telephony is Nortel. How i can integrate?? 802.1x and Nortel IP Phone.Best Regards

I have an ACS server 3.2 currently running on my network with all my aaa clients configured for TACACS+. I have the need to get some WLAN users authenticated through the ACS using RADIUS.Can I run both RADIUS and TACACS+ on thesame ACS server?

Does Cisco ACS support the search scope functionality? We are trying to get ACS to go to a specific container and if the user is not found there, to search the OUs in the structure to see if it is there.Thank you,Dwane

Is it possible to provide limited privilege to a remote user based on results from Cisco remote agent? ie. let's say the remote machine does not have the right anti virus, therefore I only want to give them read access from corporate dmz. No write ...

When logging to some of our routers, we get sometimes (not always!!!) a command authorization failure, sometimes the command works, sometimes the same command fails, also in the tacacs logs there is no trace of the attempt to log in on this router.

hi all, I have made two different groups like the below 1) 0:NacsGroup1(1user) 2) 1:Switches(1user)i m able to authenticate through the user made in "Nacsgroup" but i m not able to authenticate through the user made in "Switches"the aaa configuratio...