Network Access Control

Just purchased Pix Firewall, It is in our development Lan for the moment until configuration is completed. My question being new to the Pix world is I would like to have my users Authenticate with user name and password for access to the Internet. My...

I am trying to allow my users to reverse telnet to a US Robotics Sportster 56K modem which is connected to the auxilary port of a Cisco 1710. First I want them to authenticate either the local or radius user databases. I have been able to reverse ...

Where can I change the password for L2TP tunnel authentication on vpn3030.on the other end of L2TP tunnel is 2621. configured vpnd with: l2tp tunnel password cisco.

HI I really hope that someone could give me some suggestion on this one.I have create PPTP connection to PIX506, Local authentication is doing fine, but whenever i'm adding and ACS server for authentication, either inside or outside, my PPTP connecti...

Does anybody know if you can give a DNS-suffix and DNS- IP address working with ACS-Database users (ACS v3.0) for dial-up users that authenticated using RADIUS protocol?Thanks.

I have a PIX 515E. I've set it up so that console telnet access is authenticated by TATACS+ ( Cisco ACS ). How can I further set it up so that if the TACACS+ server is not available, It will resort back to Pix's local authentication (Username and p...

Is there a way I can test the Access-Challenge mechanism in Cisco Secure ACS? I looking for something simple similar to the way that GNU RADIUS uses the menus file?

I am able to connect using the VPN Dialer, and can see our corporate intranet via Internet Explorer, but cannot see any network resources. I am running Windows XP at home and suspect it has something to do with authentication.My login name at home i...

hi i have a cisco Router 3640 with modem and it is a NAS and every user is autorise from Cisco Secure 2.6 and unfortunatly every 10 minutes exactly ...it didn't depends from ISDN or analogique and i have tried to foud in cisco secure or inside the ro...

i have created this PPTP connection to a cisco2600, but i want to add an ACS server for authentication and accounting function, is that possible? i can do it for VPN client to router, cannot find anything about PPTP to router with ACS. any help would...

Does anyone have a veiw on whether it is insecure or not to do authentication across the internet. If I have a number of sites with PIX firewalls providing VPN access for remote users could I authenticate these users across the internet to a AAA serv...

Hi, i have2 win 2000 servers with ACS 3.0, i have limited the sessions per user to 1, but it doesn't works. I have a test scenario, and there its working. Any idea why in the test scenario works and in the production scenario don't works? Thanks,....

The Cisco ACS 3.0 's is quite a lot of money, why is so expensive? i only need manage access for my switches and routers in my company, i do not have dial-in access. Must I look for another option?thanks.

Hi , I've got a design question. I've to set up a firewall solution for a company which is using some terminal servers for their users. What I'm concerned about is how PIX would handle internet connections coming from the same internal IP add...

Is there a way to change the ports that RADIUS listens on from the default?