Network Access Control

Hello, When trying to lanuch anyconnect profile editor I see this error  "Failed to load Main Class: com/cisco/acprofile/AcProfile" I tried on latest anyconnect version and older same error 

I am configuring TrustSec on an ISE node & Catalyst 6807 Switch. I configured NDAC & EAP-FAST on the Catalyst 6807 Switch and the ISE node so they can create a secure RADIUS channel between them for the TrustSec solution.  TLS 1.0 is disabled on the ...

I have a Cisco ISE 2.6 running MAB authentication only. The list of authorized MACs has been uploaded to ISE. However, after deleting one MAC address, the endpoint still authenticates and successfully connects to the network. I checked logs and its s...

is there any alternatives for ISE profiling to get the IP-to-MAC bindings without radius, nmap or dhcp probes? I have workstations connected to my NAD (layer 2 switch), where i don't have radius authentication on the workstation ports. I also don't w...

Hi Guys, After read some Cisco documentation, I have questions for you about the relation between 802.1x and DACL. If I want to push DACL on a Cisco Switch from ISE node, do I need to enable 802.1x command on the switch ? In fact, I'm asking me which...

Hi,After I configure the posture with "call home" to detect the PSN servers, the wireless can detect the PSN and check the compliance and the COA is working properly, the endpoint goes from unknown (Redirect URL) to compliant. For the wired, the endp...

Hello,does somebody know if live migration of ISE VM running on Hyper-V is supported in Version 2.7?In the installation guide (https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_c...

I have recently introduced Cisco ISE-PIC 2.7 into my infrastructure for the sole purpose of providing user identity management for Firepower access control. This is because the Firepower User Agent is no longer supported and ISE-PIC is now a requirem...

Hi,In a 4 nodes ISE (2PAN/Mnt + 2PSN), I would like to understand what is CTS CoA and why it is the PAN that advertise the NADs with these CoA?https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_Insta...