Is it possible to perform the following workflow in RME 4.2 in a streamlined fashion?- Run a large number of "show" commands on a set of devices, store/email the output somewhere.- Upgrade the OS image on the above devices and reboot if successful, o...
When running all reports from GUI, all is fine, when running the reports from UT -cli, for example a switchportreclaimreport, the result is empty, no error messages displayed
Using ACS version 4.2 & LMS version 3.1Multiple catalyst4506 network. One of the vlans in the environment is dedicated to a subsidiary company. The operators in this vlan want to be able to enable/disable and add descriptions to the ports in their vl...
The below switch is connect to 6500 switch over a dot1q trunk link. The 6500 has serveral SVI interfaces, under 'sh cdp ne' on the 3750 edge switch there is no management ip address (see below)Why is this happening---------------------------- sh cdp ...
Hey Guys,We are setting up a LMS2.6 (latest patches applied) approver list and after creating a job the approver can not see the Maker comment.Example message:ceriel is requesting your approval for the following job:Job Id: 1583Job Description: 3de ...
Hi,Is it possible to have Ciscoworks generate an email when it fails to backup the config of a router or switch?Where do I go to setup such alerts?Thanks!
Hi there, I have problem in finding IP phone in LMS Campus Manager. I can c phone in end host report but not in IP phone list. I have added Call Manager in Topology & its green color in Topology View. I have verified SNMP services on Call Manger its ...
Hello,after installing LMS 2.6, the rme-homepage shows the following error:"You are not authorized to view the details" (see attachment). I recovered the password with "dbpasswd.pl", but without solution.I do not why. Please help me.Kind regards.Volk...
Hello folks, I recently inherited some routers I noticed that on some of them I get this message when I run the show running configuration command.Current configuration : 4097 bytes!! Last configuration change at 09:45:01 GMT Wed Nov 5 2008!Can someo...
I am having problems getting User Tracking to discover the IP phones on my network. I am using LMS 3.0 with Campus Manager 5.0.4 and my Call Managers are version 6.1.2.My call managers are discovered correctly in Topology Services and I have carried ...
Hi all, I have Cisco works LMS 2.6 and I am new with this. My manager want whenever if any one login into the device (one of the core switch) / made some changes then we need to get an Email. Can somebody help out me. Regards, Naidu.
In one of my router's logs, I saw:000910: Dec 31 23:59:00.405 MST: %HA_EM-3-FMPD_CLI_CONNECT: Unable to establish CLI session: no tty lines available, minimum of 2 required by EEMso I logged into it (an 1811W running IOS 12.4(11)XW5) yesterday and wh...
I currently have a LMS 3.0 running with 300 limit license. I purchased the NFR release of LMS 3.1, can I use my 300 limit license on the NFR release? According to the documentation it says the following:http://www.cisco.com/en/US/docs/net_mgmt/ciscow...
