Hi,We have LMS 2.6 installed on Windows 2003 and planned to install the latest update for each application (DFM, CM, RME).We would like to update the server with the microsoft Update.Does anyone know what are the update approved by Cisco ?Regards
Hi,We have a requirement where the FWSM has to send logs messages to the exchange server (located on a directly connected DMZ).Will the following configurations be enough.logging onlogging from fwsm@abc.comlogging recipient-address admin@abc.comsmtp-...
Hello,during my evalutation of Cisco Works Network Compliance Manager I found that there is no special "Driver" for the 1800er.For example when I add one of our "Cisco 1812" Routers the automatically assigned driver is "Cisco routers, IOS, unrecogniz...
When I try to manually add a device to the DCR the message "duplicate device" appears, but when I search the DCR neither the device name or ip address appears.This is not a recently placed device, it just uses different credentials then the default d...
He Experts,I have problems with groups.in CS I setup groups as parent Europe filter the member based on User Defined Field calling Region Europe. All devices with this UDF Region Europe entry showing up in that group. Then I build some child groups u...
I have a 2 MBps link and I want to to reserve 1.5 MBps for SMTP only. Pls suggest the best way to do this. Currently I have done thru 'rate-limit' as per below config. pls check the same and suggest the best configs.rate-limit input access-group 102 ...
Hello All,I recently downloaded JPERF to better understand how throughput is affected by changing Buffer length and TCP window size values. I installed JPERF on two machines with one running as a server and the other as a client. On both the client...
Am preparing to upgrade from LMS 3.0.1 to 3.1. At present the backup process fails due to a lock file issue. There is no lock file present now. It is obviouslt related to the backup process itself. I have attached the dbbackup.log file. Any ideas?
I've got a problem in HUM as I can't poll 5 devices. When I want to configure polling instances on those 5 switches (3500XL, 3550 and 3560 in snmp v2 and v3), there is nothing to poll.snmpwalk is working fine and all other module are working fine on ...
Hi thereWith regards capacity planning, we follow a very recative process of "knowing how many ports are in use", and thus waht essentially our utilised capacity may be.To my knowledge, there is no "automated" means of generating information taht dis...
Are non Cisco IP phones able to be discovered by the User Tracking Utility in Campus Manager? My customer has just added many Nortel phones on the network and would like them to be discovered if possible. I'm not thinking that they will but curious i...
Hello ,I have a question for advanced possibilities in the Campus User Tracking reports.I use a custom report for each customer to account used ports in a shared environment. I want only account ports which has a connection in the last 30 days. This...
I am not able to do device discovery anymore. It was working. I am seeing the following across the top of the latest discovery report.Campus Manager Administration Device Discovery-All Devices Report as of 28 Aug 2008, 05:48:14Last Discovery Start...
I'm using LMS3.0 on a windows 2003 server. Almost every day processes are down (state : Administrator has shut down this server). 40 are running normally and 33 are down.I had the same problem before with LMS 3.0.1 so I uninstalled it and reinstall 3...
