Network Management

Hi, Have a requirement to offer IPSec over broadband internet links terminating on shared concentrator(7200 series routers) at central NOC and using VRFs to provide IP isolation between different customers. I intend to use CiscoWorks (at NOC) as a ...

Hi AllWe have a very old Ciscoworks 2.2 ( ANi Server 4.2) which is still working and installed on Solaris but the User Tracking is not working.What do I need to enable to get this working?Please help.Thanks

How does DFM get these counters? I keep getting alerted on high discard rates and error rates on etherchannel interfaces...but I'm not seeing any errors or dropped packets on them when I log on to the switch.

I am seeing some devices in device centre coming up as NULL when opened. I don't know how to explain exactly so I attached a pic.I thought perhaps it had something to do with the device type but I can open another device of the same type and it work...

Please help in creating config template for a multicaste routing. From Server: 192.168.11.12 Multicaste address:239.0.0.1/5000 To seven different Branch offices 1.172.16.0.0/24 2.192.168.201.0/24 3.192.168.10.0/24 4.192.168.11.0/24 5.192.168.12.0/24 ...

I have a large number of devices I need to add to ACS, I would like to import the data.

Hi could somebody tell me what these applications do:- Cisco Unified Communications Management Suite-Cisco IP Solution Center- Cisco Network Analysis Module v3.xI've looked on the website but couldn't really find what they do.Thanks

Hi,Anybody has any idea, how much bandwitdh would be required to monitor a CCM/unity server across WAN by an operations manager 2.0 server.Please sent me a relevant link if any.2.What configuration needs to be done on CCM for down.any software snmp a...

Hello,I am looking to gather network traffic using SNMP. The data I am really interested in is bits per second, the show interface summary command. I have figured out how to get ifIn/OutOctet using SNMP however I really want bits per second. Anyon...

We're in the process of bringing the new version of Cisco Works online and noticed today that in Topology Services > Network Views > LAN Edge View we're missing APs from our switch clouds. They show up in 2.6 for this view, but not 3.0.Anyone else se...

"OID not supported by device". This is the message received when Solarwinds Cirrus v4 attempts to read the RFC1213-MIB:System MIB>. Device is c3750e running IOS 12.2(44)SE1. Using SNMPv3 authpriv security level. Any idea why certain MIB-2 MIB's a...

Hi all. My coy has very high utilization for incoming traffic base on a basic graph that was provided to my company by isp to check for internet utilization. However i would like to know what ports on the foreign addresses are causing this high utili...

I am trying to implement CEoIP using the CEM-4SER module on a 2651XM router. I have been able to get the channels to sync properly. However, regardless of what I change in the IOS settings, I continue to get a 3-5% error rate during transmission. I h...