I'm trying to configure my new SG250-08 for my home network. I'm not very familiar with configuration of switches and or routers. I managed to create 3 VLAN's on the switch and I'm able to ping between all VLAN's including VLAN1. I can also ping fro...
Hi,whenever Cisco prime infra 3.4 rebooted (planned or unplanned) the VM loss the connectivity.we have noticed that after restart the VM, the network interface name is changed (ex. from eth0 to eth1 or eth2--9 ) then the new interface has no IP assig...
Hey Guys, Ive got an old Catalyst 3560 POE Switch.i was in my cabinet for months. now i tried to use it again, but i wont boot.on the left all LED's are lightning up and thats it...the console stays empty.
I just implemented an RV345 router at my company and for some reason, every 3-4 minutes the internet drops for 20 seconds. I was running a continuous ping to 8.8.8.8 and google.com and you see the response timeouts when it drops. The router is connec...
More interested in math and programming, but am taking some networking to kick the tires, and holy smokes, is this boring. I can't pay attention for more than 30 seconds. Can I get input from career folks?
I hope that I am posting this in the correct place, if not please let me know and I will move it. So I use Cisco packet tracer to design and test my network layout (to make sure I didn't mess up or forget anything) before deploying to the actual devi...
Hi,We are setting up MRTG to monitor the firewall interface usages.snmp-server host eof-cth 10.33.192.25 community ***** version 2c udp-port 161snmp-server host ABCD 10.33.192.25 community ***** version 2c udp-port 161no snmp-server locationno snmp-s...
How we can delete ACL and Auto QoS from Cisco Switch 3650?Extended IP access list AutoQos-4.0-Acl-Bulk-Data10 permit tcp any any eq 2220 permit tcp any any eq 46530 permit tcp any any eq 14340 permit tcp any any eq 99350 permit tcp any any eq 99560 p...
Hello community ! I'm trying to connect an AWS Direct Connect connection to my VPN through a CSR. I need to add the CSR because I need to set a NAT between the onpremise datacenter and the AWS cloud but I haven't find any documentation about this, c...
so I am working on a project for my networking class and there is a section of the network topology that has three routers connected with serial cables like a triangle formation ( i will include the image and you will see). and Im used to the labs th...
Hi there,Thanks for reading. I have a c9200L running 16.12.4. I'm not finding the FILE flag as part of a packet capture. The EXPORT command assumes that I've written to a file. I thought there was a way to copy the buffer into a local file? Thanks...
Dear All I m looking to Restrict up/down bandwidth to 128 Kb on my router. the point is to save data quota of my broadband connection. whoever browse the internet they will have only 128Kbps and the speed checker will show 0.1 Mbps and 64 for some ot...
