Hello everyone,I'm looking for detailed hardware specifications for the Cisco Business CBS110-8T-D-CN 8-port Gigabit Ethernet switch.I understand that an older hardware version of this model uses the Realtek RTL8370N switch chipset. Does the current ...
Forum Posts
We are aware and actively investigating issues with SAML SSO failures. Customers may experience log in errors with page not found. A workaround is removing the /login/saml/email_verification from the end of the URL. This is being investigated as a pr...
Hi everyone - my company is hosting a happy hour in the below cities the day before Cisco Connect as a way for the network and automation communities to have a chance to meet off the show floor. You’re also totally welcome to sign up if you’re not go...
We’re excited to announce more granular access controls for RBAC (Role-Based Access Control) Custom Roles in the Meraki dashboard. RBAC Custom Roles helps you define what each administrator can access by product – and now you can narrow it even more ...
Resolved! SNMP at 5s and 6s
Hi There,Was wondering if someone has come across this before.I'm polling a couple very limited SNMP OIDs (ifHCInOctets/ifHCOutOctets of some interfaces) at high intervals on Catalyst 9300 class switches.At 5s, the ifHCInOctets/ifHCOutOctets is very ...
Hello everyoneI want to know if you change your clock configuration each year or not ? I mean what do you do to change the summer-time each year? Because the date and the day will change every year.I mean, this year the summer-time is : 10 Mar and 3 ...
Hi, I am currently building a voice network with some adjustments in Packet Tracer, but I came across this problem.In the typical VOIP configuration, it seems that most people use a router (2811), a switch, and then the IP phones, but in my case, I w...
Hey all! One thing I have been tasked to do is to come up with a best practice configuration for all of our Cisco equipment. We are a cisco only shop, and have ASA, Cataylst switches, ISR 4321's, 8200L, and some nexus switches. As it stands, our equi...
Historically I've heard of certain commands appearing in a different order for the same device configuration. In the startup config for instance you might see subcommand B before subcommand A, even if for the same configuration you used to see A befo...
Hi,Im fiddeling with various EEM applets and feel a bit held back by the lack of documentation. Or maybe my google-searching skills have declined. First: Is there an official documentation of variables somewhere? So far I have pretty much brute-force...
Hello everyone,I am new to networking and currently working toward getting my CCNA certification. I decided to purchase some Cisco hardware to get hands-on experience by building a home lab while following a course and reading the CCNA book.To make a...
Hi Guys What I'm trying to achieve: 1. Every time an engineer runs the write-memory command, a copy of the running config is sent to my SCP server. 2. Every 7 days, a copy of the running config is sent to my SCP server. 3. The password in confi...
Hi All, I purchased a Cisco Catalyst 1000 Series switch model C1000-16P-2G-L just recently. I was so excited to get it that I didn't do any setup, just literally unpacked it, plugged the power onto it and plugged in all my home networking. ...
My boss told me to reach out to Cisco or the Cisco partner that Installed the router for my company, but it has been over 10 years that they installed the current router in my company, and I could not find the contact of they company that installed t...
adquirí 3 router, lo configure a través de consola, funciono muy bien como repetidor Wi Fi, pasado unos años de pronto comensaron a parpadear las luces de verde a naranja y a rojo y se perdio el Wi Fi. los resetee volvi a configuralo pero con la wi f...
