Network Security

Recently I upgraded several appliances from the old Pix 501 to 5515. I am struggling trying to simply set up a static route. On the old routers I would enter the command as such                            access-list outside_access_in extended permit...

Hi,I am trying to set up RDP with server 2012. I have set the nat and access rules set properly. I am using Cisco ASDM to configure the router to allow RDP connection, but i am not able to achieve outside connection. Here is what i have in nat ruleHe...

I have an ASA 5510 with 1 outside interface configured and 1 inside interface 172.16.1.1, there is a MPLS router on the inside that routes to several differant location. My phone system is on the inside but runs on the 192.168.1.0 network and it need...

if this is answer in any earlier post I apologize, how to setup inter VLAN routing on Cisco ASA5510, I new to cisco ASA5510.thank you.                  

Hi, I've this configuration on a brand new 5510 with software 8.4.1:ASA Version 8.4(4)1 !hostname ciscoasa!interface Ethernet0/0 nameif outside security-level 0 ip address <PUBLIC_IP_ROUTER+2> 255.255.255.248 !interface Ethernet0/1 nameif inside secu...

Hi all,I have bought a Cisco ISA 550 small business firewall and I had to face to a problem when I configure the NAT. My scenario is,I have a mail server in my LAN which is need to be access from both inside and outsideMy lan network is 192.168.0.0/2...

Hi.is possible to config an subscrat rule for all the signatures enables in IPS?ThnksSent from Cisco Technical Support iPad App

Hi ,I have to migraste current IOS conditional NAT to our new ASA 5515x.However the NAT misses the possibility to define it via access lists.I've found something about the twice NAT, however i didn't find the way how to implement it.Here is the curre...

Hey folks, i desperatly need some assistance with my ISR 800 series router zone based Firewall.The router is currently setup and routing traffic to the internet successfully.I would like to setup a custom inbound port(TCP-3389) accessible from the in...

I tried this many different ways but either I'm hitting a bug or I don't understand the concept completely. Either way please let me know what I'm doing wrong. So here's the scenario..I'm looking after a firewall in a DC catering multiple clients. Ea...

Hi!It feels like I have been beating my head against the wall for three days now. I finally think must accept I have bitten off more than I can chew.My situation: I want the ASA to have a static IP internally, act as an internal DHCP-server, and on t...