Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Resolved! Security Levels

On the ASA's I know Higher security levels can access lower security levels.  Does that all change once an access list is applied to the higher level interface? For instance I have an inside interface within the 172.16.1.0/24 network.  The inside int...

Hello,I have an interesting issue I can't figure out. My setup is simple; <inside network (192.168.1.x)> -------> ASA---------> Inet.Clients on the 192.168.1.x subnet can ping 4.2.2.2 and get icmp replies with no problem. However, if I try to do an e...

Danny Steier by • Community Member
  • 1887 Views
  • 4 replies
  • 0 Helpful votes

I have an ASA 5505 with ASA version 7.2(2) and ASDM version 5.2(2) and I am attempting to open ports 88 and 5445 and forward them to the IP address of my DVR.  This is all new for me.  I see several posts for other software version to do this same th...

sgoodwin by • Community Member
  • 1402 Views
  • 1 replies
  • 0 Helpful votes

hi alli tried adding a content rule on my asa 5515x, it say i don' t have one configured in configuration/firewall/url filtering.  when i got there, i need to configure either websense or smartfiler.  Are those free or I need to purchase that from th...

venerayan by • Community Member
  • 2025 Views
  • 2 replies
  • 0 Helpful votes

Hello,  my network is getting effected with Spam and Malware. we have cisco asa 5510 but i'm not security specialist. can someone help to get this stopped hitting into my networkMany Thanks kz

zaman.voip by • Frequent Visitor
  • 1668 Views
  • 2 replies
  • 0 Helpful votes

Hi guys,I'm newbie in a FW matters, I need to apply some filters between our corporate network and our industrial networks (FTP traffic and some special ports for telnet matters). For that I'm using an ASA 5510 building a etherchannel with 3 of its F...

fuenteslg by • Community Member
  • 2520 Views
  • 15 replies
  • 0 Helpful votes

I am working with a small off that has a 5505 acting as a basic firewall.  Behind it are off-the-shelf unmanaged switches.  Two users have to work with an outside vendor and are having issues.  They have a Sonicwall remote VPN client on each of their...

krcollab by • Level 8
  • 1368 Views
  • 7 replies
  • 0 Helpful votes

                   Hi everyoneNeed to confirm if we have extended ACL with object group belowaccess-list xy_access_in extended permit ip object-group xy_subnets object-group cisco_ynetworks will above ACL allow all the ports  on the destination objec...

mahesh18 by • Level 7
  • 2288 Views
  • 3 replies
  • 0 Helpful votes