Network Security

Got to know that AVC currently recognizes thousands of applications, including voice/video, email, file sharing, gaming, and peer-to-peer (P2P)applications.But does anyone have the specific application list especially voice/video.thanks

Hi Team,We have 5 servers ( AD,Emailserver,SAP & 2 application servers).As per customer request i have to public those servers through internet because customer want to access from his office(remote).The five servers already connected with switch.Cur...

Hi,want to know the command for configuring NAT on My ASA5505.Local IP - 192.168.1.0/241Public IP - 182.73.109.118 255.255.255.252Kindly share the comands.

As per as diagram the firewall is connected to L3 switch (inside interface ) and L2 switch(dmz interface).On dmz we have vlan 55 .Due to port limitivity on L2 switch we have directly connected a lan cable fromL3 switch to dmz switch with vlan 55 on b...

Hello guys, can somebody help me?I can't access the IPS software module in the ASDM. When I try acess I got the error message:Error connecting to sensor. Error Loading SensorOutput from ASA:ASA# sh module ips detailsGetting details from the Service M...

Hi All I am hoping someone is able to help on the following, I would expect the banner to be presented when the user first connects as per the Cisco link below:http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_management.h...

Dear all,I' d like to have some support for a very-basic PIX firewall configuration.I 'm dealing with  PIX 515E.Inside hosts can ping inside interface , outside hosts outside interface and so on...Simply i cannot ping outside interface from inside ho...

I need to upload a new version of ASDM to my device, so that it will work with the ASA software.I tried using a TFTP server on my PC, but received an error.I connected to the ASA with the console cable & since I'm running Win7, I used Putty & a seria...

I thought I had configured the various software corectly on an ASA 5505, but appears not.In Show Version the ASA Software version is 8.4(4)1 & the Device Manager version is 6.4(9). These are the settings I want; I had previously set asdm image disk0:...

with acs 4.2 installed in my network,   PEAP, EAP-TLS, md5... authentications work normally.  But Mac-Based-Authentication   doesnt work at all.  i tested every thing but no luck .This is what i have setup on Swith for MAB:aaa new-modelaaa authentica...

I have a network with 2 ASA's with different blocks of IP's on each.I have configured an inbound NAT to a web server on ASA2The inbound NAT works fine, and when I hit the external address I get a hit on the access list and I see the connection made i...

I need to be able to ssh to local interface on an ASA 7.2.5 cluster, IP=X.147.1.110 (primary cluster address) for management.- the acl on the interface allows the connection, and shows hits- ssh is allowed "ssh Y.35.252.0 255.255.254.0 elink"- fw is ...

I have two routers on my internal network.  I don't have the  means to draw a diagram, and I'm a noob when it comes to Cisco.10.10.199.106 is a Cisco ASA5510.10.10.199.108 is a Sonicwall NSA 3500The sonicwall handles our site to site VPN tunnels.  Th...