In todays network there is a need for 10G server connectivity or at least more than 1G connectivity . Network1Attached Network1 is a simple logical design of a network where inside and outside and dmz is connected to firewall which means there are 3 ...
Hi there, I have a static IP address over 100Mbit fiber. I've installed a Mac Mini as a webserver and opened the ports 80, 443 and 5900 and a few others for minor services. Everything works fine: the http server (and https as well) is up and pepole ...
Hello,I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them.I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the seco...
Hi, I need to give a restricted access to internet by allowing few sites. How will I do it with the url of a particular website. If I put the url in the configuration it resolves to only a single IP. How will I do it for a website like ...
i have a situation where i have a deployed asa5505 running 8.4.1.The client has an existing mail server that is located on their lan and has Port Nat's configured for the normal mail ports, 25,110,993,587 etc.This works fine for mail inbound and for...
Hi all,I have some problem with my Cisco ASA 8.2 5510. I have to know how shoud i connect 2 inside interfaces together. I am writing what i have.I have 5 network connection on Cisco ASA.1. Interface Ethernet 0/0 - outside 200.200.200.200 255.255.255....
Hi All,I just need to clarify a few simple rule to clear my doubts off.Apparently i have a outside, inside and DMZ interface.dmz-server = 172.16.10.10inside-server = 192.168.1.254'I just need 2 simple rule.1. DMZ-server to access inside-server IP onl...
Hi All,Can someone help how ASA device forwarding traffic to AIP-SSM? I'm not taking abt Configuration part like Class-map, policy-map and service policy....want to understand the traffic flow from ASA once traffic matched with ACL to AIP-SSM.From on...
We have two ASA's running 8.0(3)6, with one set up as the EZVPN server and the other as the EZVPN client. The EZVPN server forwards the packets internally to a FWSM running an old version of firmware (2.3(2)) configured in our core switch. Between th...
Hello,I recently put in production a new firewall 5515X , but we had some issue related to the WoIP and the Video Calls. Our solution for Video its similar to the voip it use UDP to send the images and voice, we notice that at the begining the video ...
Hi,I am working on configuring ASA to connect to device called NETUX2000. this is for voip traffic. The n/w design is:SIP Trunks <-Internet router -> ASA -> Netux -> SwitchThis is just two ports of ASA but other ports are connected to diff ISP and al...
Hi!I have a PIX 535 running PIX OS 8.0.4.28 and I am trying to implement same security level (level 100) between two PIX interfaces. One range of subnets is coming from a Catalyst 3560G with IP routing and CIDR subnetting in another area and another ...
What is the difference between dhcp relay and dhcp proxy with respect to ASAs?Thanks,Kashish
Hi All,I have ASA 5585 with SSP20. I want to enable same security level subinterfaces (routed mode) to communicate with each other. I have put below command at global level but somehow it is not happening.hostname(config)# same-security-traffic perm...
Hello Guys,I am trying to allow skype communication through ASA firewall. In current scenario I need to allow all TCP ports or TCP port 80 to allow skype but that gives users access to every URL on Internet. So I want to allow skype application only ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-06-2026 12:20 AM | ||
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM |
| User | Count |
|---|---|
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
