Network Security

Hi out there I have a - probably simple - problem with a Cisco ASA 5510 with a SSM10module. We NAT through the outside interface - through the global policy:service-policy IPS interface outsidehave we assigned the IPS to the outside interface. We dir...

Hi,Is it possible to do a port translation for any IP to a host on an ASA 5510 ASA Version 8.0(3)I would like to have any host trying to access a web server to be be forwarded from port 80 to 443.But when i try to make a static NAT rule it's not poss...

I have a PIX with multiple interfaces. Obviously there is an Inside, which is 10.x.x.x and the Outside faces the Internet.  PAT is being done with a "nat (inside) 1 10.0.0.0" command and a "global 1 interface" on Outside.  There are also DMZ's on two...

Dear Team,Eventhough my Problem  seems to be small, there is no way i found to reach you.I am Unable to get Console Activity on ASA 5520 version 8.2 using Hyperminal Software,The Following observation i found :a) No charecters are visible eventhough ...

Hello Friends,I am lookig to configure site-site vpn between two ADSL routers , but the problem is their public keeps changing after very re-conect from their respectiveISP. I heard there is still some solution to overcome this with the helo Dyanamic...

We have been using SNORT and now evaluating Cisco IPS sensors. The first question is:- We have 2 ASA 5510 configured as Active/Active failover and have 2 different data centers. How many IPS do we esentially need?My guess is 2 - one for each data cen...

Hi all,           I have two subnets in the inside network(inside interface connected to a router with different sunets). Packet tracer shows that the packet go the default route which means there is no NAT for the subnet?? I tried to add the followi...

I don't understand why I can't get DHCP services to work on the wifi 3rd interface on an ASA 5505.  I have the basic license so can't get to inside but I don't see why that should matter.I have a wireless AP plugged into Ethernet0/6, wireless clients...

Guys,I am having a 5550 firewall in my network, even though they are no complains about it's performance from users, I can see the CPU utilisation is going steadily higher and higher this year. During a business day it's always somewhere between 30-5...

Dec 21 02:08:38 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0Dec 21 02:08:38 [IKEv1]: IP = 1xx.1xx.1xx.xx, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.Dec 21 02:08:39 [IKEv1 DEBUG]: IP = 1xx.1xx.1xx.xx, IKE M...

We have many ASA with v8.0x and we want to limit resource for SSH, telnet and ASDM sessions for Audit purpose.By checking Cisoco document, I can manage to test to limit resource with below commands. But it can only perform after enabling multiple con...