Network Security

Hello, I've been looking through the forums and have been seeing different answers to this:Say I have two PIX 515e's running V7 in failover - I've got 6 interfaces: outside, dmz1, dmz2, dmz3, failover and inside.Can I run multiple VLANs in dmz2 for e...

Hi all,I have read that PIX version 7 and up allows "hairpinning" encrypted traffic. That's beautiful, but did someone find out how to route regular IP traffic through the same interface (same security level) on a PIX running version 7up? Alernativel...

HI,i am currenty planning an upgrade for two pix and FWSM in active stanby mode from version 7.0(1) to 7.0(2) and 2.3(2) to 2.3(3), but i haven't find any info about this type of migration. Since this is a not a major upgrade, can anyone tell me what...

When i boot my PIX 501, it get stuck over hereany clueRegards manishCISCO SYSTEMS PIX FIREWALLEmbedded BIOS Version 4.3.207 01/02/02 16:12:22.73Compiled by morlee32 MB RAMPCI Device Table.Bus Dev Func VendID DevID Class Irq 00 00 00 8086 7192 Host Br...

I guess the big red check by my other thread is keeping folks from replying, so I'll try another one. I was having problems with the Cisco VPN Client last week after installing/uninstalling ZoneAlarm. Over the weekend after sitting down and cleaning ...

I have a Cisco PIX 515E running version 6.3(4). It has three ethernet interfaces. Is it possible to have two WAN connections coming in through it with one LAN connection? For example.eth0 - public IP address (ISP #1)eth1 - public IP address (ISP #2)e...

Dear all, i have the following problem: On the DMZ of the PIX we have two servers:-primary with address X-secondary with address Y-network load balancing address of two servers ZWe need to nat mail messages to and from IP M according to the following...

Hi,Pls find the attached diagram.the requirement is:1. inside servers should ping pix inside,dmz,outside interface.2.the server in pix dmz should be able to ping pix dmz,inside,outside interface and all servers inside.3. from ISA i should be able to ...

If a new modular policy is defined and applied to an interface, does the default global policy (policy-map asa_global_fw_policy) get applied too, or does the contents of the new interface policy need to include the actions of the global policy. I am ...

Hi,I have a Linux Agent on a Apache WEB server and I created some exception rule for Network access and file access, but they aren't working. The agent keeps fire the same events as befor. Any idea?

Hi,Need your feedback.Refer the attached diagram.This is as per my client requirements.1. is it good to have exchange front end server on cisco PIX DMZ?2. Exchange FE has to contact the domain controller,exchange backend server inside.3.there is only...

when i tried to restore csa mc backup i got the following problem.Configuration Restoring Log1. Checking master database integrity...Master database integrity is OK.2. Checking csamc database integrity...csamc database integrity is OK.csamc database ...

hi,I have rules, depends on Management Center's availability. I want to speed up the determination of this process. May I do this?

HiI have a pix firewall.inside Ip address 10.10.10.12dmz ip address 192.168.25.11.In inside have file serverip address: 10.10.10.101name:fserverDNS server:10.10.10.83----------------------In DMZ has user and pc address 192.168.25.30now I want dmz use...