So I posted a question last week with some questions about Cisco routers and VPN's. I already have my CCNA in routing and switching, but I'm starting to work with more VPN's. I've set up an IPSec tunnel between two devices before, but as I'm starting...
Forum Posts
Resolved! FTD password expiration
Hello, I have FTD 6.6.1 managed by FMC and I would like to ask if I can set the expiration time for the admin user of the SSH I give the command and it says I cannot change the current user Thanks and regards, Konstantinos
Hi everyoneI have this confusing problem with clustering two FTD 4100 series, when copying the cluster configuration from the first one to the other one, it stays at this state all the time and not give even an errornotice that I have both FTD have 2...
Hi, I've rolled out dot1x via Cisco ISE onto a customer user network. The user access switches are 2960X. The version of ISE is 2.7 Patch 2. There are a few issues, specifically with a group of users. I want to created a new policy set for one user i...
In one of my firewall , I am able to see that the failover state is showing as failed : Other host: Secondary - FailedActive time: 0 (sec)slot 0: status (Up Sys)Interface inside: Normal (Monitored)Interface outside : Failed (Waiting)slot 1: SFR5525...
I'm attempting to implement Aruba Central's Cloud Guest feature as we replaced our Cisco APs with Arubas, I've been battling this issue with Aruba Support for a while and they still beileve it's an issue with our Cisco ASA Firewall and their websites...
Resolved! Cisco FTD static route leaking
I have an upcoming project that requires the configuration of a FTD, I'm new to FTD so this will be a learning curve. From the research I've done you can create static route leaking from one VRF to another VRF on the FTD, does this route leak create ...
Hello, I am having an issue with ASDM loading the configuration of my ASA 5585-X I get the following messages/errors I have included some output from some commands that might be helpful. I have searched forums and everything else but I cannot find...
I configured my IPS policy by filtering by maleware and selecting "Drop and Block" for all snort rules. I have this event coming up (See atttached) matching one of the rules. Its the internal DNS server it seems being flagged as the attacker and even...
Resolved! Rules per page
Can I change the number of access control policy rules displayed per page in FMC? It seems to default to displaying only 50 rules at a time, which is a bit low.
I imported the certificate to java trusted certificates, it shows the some error.is it due to certificate is Self-signed ?.And is there any way to overcome this problem other than overriding SSL certificate verification.Is there any way to add SAN to...
We are in the process of deploying an FTD on a 4110. We have access to the web interface of the firewall chassis manager and the fxos via ssh. I uploaded FTD-6.6.4 onto the appliance, and I'm trying to create a logical FTD device. There is the one ma...
Hi all!After upgrading from 6.4.0 to 7.0.0 I am stuck with some pending deployment changes. When I try to deploy them I get the following error:ERROR: Failed to open "udp/localized/25/4500"ERROR: Error opening IKE port 4500 on Interface outsideConfig...
Dear Community, I would like to implement Host Discovery as part of the Network Discovery Policy. However, I had a few questions: 1) The Config guide states: "Rules in your network discovery policy are evaluated sequentially. You can create rules wit...
Resolved! CVE-2018-0101 – Cisco ASA Remote Code
Hello everyone, I have found the CVE-2018-0101 vulnerability recently.Our ASA(5515) had enable the webvpn. Here is the show version output:ASA5515# sho version | in VersionCisco Adaptive Security Appliance Software Version 9.2(2)4Device Manager Ve...
