Other Data Center Subjects

Hi,I want to know, whether Cisco WS-C3750X-48T-S, WS-C3750X-48P-S and N7K ( with M2 and F2e cards) support AVP Protocol (Audio/Video Profile)? FYI, In our project (Broadcast Tv Channel) we have a Talk back Solution which is a RIEDEL product. This is ...

Hi, We are migrating customer 6513 switch with Nexus 7706 switch but some of the commands are not supporting. I have tried converting the commands using IOS to NX-OS toool but still getting the issues. I am new to IPV6 addressing but simply trying to...

Can I configure Multiple VPC domain in Nexus 5K? provided given 5K is having servers, connected in diffrent VDC on upstream 7K.If we can't configure multiple VPC Domains then what is the solution for such situations?

Hi All,I have found strange thing during running OSPF between two devices Cisco Nexus 7K. Like as usual, we configure OSPF and both devices already adjacency. Let say we advertise some subnet 172.16.5.128/25 using ip ospf 1 area 0 command in SVI. But...

Hi.I have Nexus 7000 with module M224XP-23L and Nexus 2232PP.I am configuring FEX using 10G-SR interfaces.Here's my config:fex 110  pinning max-links 1  description "N2K-1"interface Ethernet5/18  description TO N2K-1  switchport  switchport mode fex-...

Hi,We doing some testing on FabricPath (FP), VPC and some other NX-OS features on Nexus Platform.The ASA Firewall is connecting to 2 x N7K with VPC (2 x 10GbE). Logically, we setup like thisN7K --- VLAN10 --- FW ---- VLAN12 ---- PCN7K is doing static...

Hi,if i use OTV unicast mode.and both primary and secondary adjacency server is down, what happen to existing OTV network?will the existing OTV connection still running on other edge device ?thanks,ivan

I configured SNMP through mgmt interface on admin VDC. But it is not working. With the same configuration it is working on all the Vdc's. Need to know do i need any physical interface on admin vdc to make this work.

Hello, does Nutanix support Cisco Prime to be installed as a vm appliance? I'm going through setup but the installation is very short and the gui does not load up. I do have access through the cli. I'm trying with version 3.3. 

Dear all    I have been investigating the above solution however I can not find the exact document so I have created this discussion.    So basically if Nexus vPC support switch can be conntected with non-NX-OS switch such as Catalyst switch. other v...

Hi allRefer to release noteCisco Nexus 5000 Series Configuration Limitsfor Cisco NX-OS Release 5.0(3)N1(1b)FeatureCisco Nexus 5000 PlatformCisco Nexus 5500 PlatformVerified LimitsMaximum LimitsVerified LimitsMaximum LimitsMaximum Fabric Extenders per...

Hi,I have Nexus 7018 with NX-OS 6.0 and 2 * N7K-M148GT-11L(Copper 1Gig) cards, 1 * N7K-F248XP-25(10Gig SPF) card.I created vdc TEST and able to allocate all interfaces of N7K-M148GT-11L(Copper 1Gig) but unable to allocate any interface in N7K-F248XP-...

we have same (just a proxy)app running in two diff DC's and needs to be connected using a effective solution. customer have black fibers and we are reluctant to just use a layer 2 trunk or Layer 3 (what if we miss any layer 2 traffic).    We are look...

Hi Friends, I am trying to configure static ARP on Nexus 9000 under Vlan Interface /SVI and getting following error message   "Invalid MAC address. Multicast MAC address cannot be used"   I am trying to add following static ARP i.e. Unicast IP with M...

can i configure portchannel accordingly