Other Network Architecture Subjects

Hi,I can create Mac-accesslist, but there is no such a command to bind the mac accesslist to any interface of Cisco Catalyst 2950-48T with latest code 12.22EA4. Please suggest me how to configure the Mac accesslist in Layer2 switch and give me soluti...

I am trying to configure mutual redistribution on a central router that has one serial connection to another router running EIGRP and off the central router I have another serial connection to a router that is runnning ISIS (there are only these two ...

has anybody hooked a Procurve into a 3750G using 802.1q trunking? Need the procurve to see my vlans created on 3750 and assigned them on Procurve on a port by port basisHP docs are horrible and they don't have Faq on how to trunk with cisco 802.1q sw...

i have a problem......or many...

Hi all,Need to check on this urgently. If I have a smartnet contract for a switch, for example. I understand that I have full access to download different ios. My question is, if I proceed to download the ios for another switch/router not under the s...

Hi,I have a 7204VXR router, its IOS version is c7200-ik9s-mz-122-13-T.bin. When I enable ip nbar protocol-discovery on fastethernet it works fine, typing the command “show ip nbar protocol-discovery” I get the right answer. On the other hand when I ...

Hi All,I'm currently experience MTU issues between 7609 and various 7X00 platforms via the fast ethernet interfaces. We MPLS enabled, so there are labels being appended, but there doesn't appear to be any fragmentation on these interfaces. Has anyone...

Dear all,Excuse me but,please give me an advice asap.I'm considering about the following network. I'll configure the HSRP between the two Cat6506. And I want to use the teaming between the two Intel Giga NIC by using Intel PROSet.From the server,Cat6...

we are currently running igrp on all routers at HQ and 6 remote branches.We've just purchased new router with new software 12.3 which removes igrp.Is there a way that we can changeall remote router from igrp to eigrp WITHOUT physically going to remot...

i am trying to forward the RDP port to a terminal server inside my LAN. but things are not working for me. Router is 801 ISDN my config is.. -------------------------- version 12.1 no service pad service timestamps debug uptime service timestamps log...

During a competitive pilot against another vendor, it has been observed that a ping packet is lost each time the MSFC router has to re-ARP the next hop. With the other vendor, there is no ping lost. beside the fact that this is not a real problem, th...

i know that there are some security guru's out there. Here's what i need i'm running 4-5 different (CELLS) all connected through a fiber backbone and have several people who like to jump around from room to room and change their workstation ports to ...