Hello,
I have the matrix and a remote site, where on the remote site I have a contracted corporate carrier link, where a tunnel is configured.
From the Matrix I can ping the remote site successfully and the reverse as well.
When I sent a traceroute f...
I have created a Windows loop back adapter with 'Obtain IP address Automatically' enabled. ipconfig /all Ethernet adapter LL Address: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Loopbac...
Hi All,
Ipsec is up but I cannot see any data inside the tunnel. Any help will be greately appreciated.
Jun 30 15:36:39.446: ISAKMP (2014): received packet from 80.127.1.2 dport 500 sport 500 Global (R) MM_KEY_EXCHJun 30 15:36:39.446: ISAKMP:(201...
What if you could give time back to IT? Provide network access in minutes for any user or device to any application – without compromise?Software-Defined Access is the industry’s first intent-based networking solution for the Enterprise built on the ...
I have topology with two endpoints connected to edge switches on a VRF.the endpoints when connected to the edge switches register themselves to CP and I can see their IPs in the CP by doing show lisp site.When I try to ping across it does not work an...
Working in a lab situation with a SG550XG-8F8T.
When configuring a LAG with LACP for a NAS this works fine (Synology RS3617xs+). The Web GUI lists both ports as "active members", no standby members. Load Balance is on IP/MAC Address.
When transferrin...
Hey guys,
I would like to monitor the temperature in my rack, but I don't have a temperature sensor.
So I thought to use the value of the cisco 3850 switches.
Is the inlet temperature value exactly the same value as the rack temperature?
Is that reli...
Dear All,
We have one L3 switch which is connected to 5 multicast input, Port 1 to 4 and this is carrying many multicast IP ( IRD video device / TV Channel).
We are talking output from port 6 and 7. In this port we need to block some multicast IP a...
I have ACS 5.8 working fine for authentication and Authorization. i have created new user and checked box "Change password on Next Login". Once i try to login with this user and asking for new password it give me access denied.
here is the output f...
Hi all
my infrastructure is of almost 1000 devices with cisco devices i face a problem the whole infrastructure is down for 5 to 10 mins suddenly and then gets up automatically i am really confused in this interval i cant ping , no internet but get...
I am trying to monitor the statuses of EIGRP on my devices. I basically want to see when EIGRP is up or down. I am using Solarwinds as a monitoring tool and someone mentioned that the OID stated in the title would be useful. When applying this OID...
Make sure to register for the DNAC Installation/Deployment workshop happening tomorrow – Tuesday, June 26 at 1 p.m. EST / 10 a.m. PST. If you can't make it to tomorrow’s workshop, then no worries - this workshop happens every Tuesday! So make sure t...
Hello,
I want to redirect the requests via ip Multicast from one server directly connected to an Cisco 6500 to our servers that are directly connected to Nexus 5K.
When I try to insert the follow command:
(config)# mac address-table static 0100....
