Other Network Architecture Subjects

Dear Sir,We have a WAN network with single Hub location and Multiple spoke location.HUB location is hosting a SAP server which will be accessed by multiple Spoke locations.We don’t have a high end Branch connectivity router which will take care of th...

I am reading the MPLS and VPN architechure. It mentions that the router will assign label to all the enties in the routing table then propagate to all its LDP neighbors. But it also mentions it uses downstream distribution method. I am kind of confus...

Dear allCan u please guide me on the following distance problems.i want gigabit ethernet, what distances will the following modules support1. LX/LH Module in Single Mode Fiber2. LX/LH Module on MultiMode Fiber3. SX Module in Multimode Fiber4. ZX Modu...

Does CW (RME.CM) work with SSH?

Hi I am trying to put a regular switching hub to one of the ports on a catalyst 2950. for some reason i cannot communicate between the catalyst and the third party switch. I checked the port security setting, its disabled. I could not figure out what...

hi,i had a problem installing a patch for cemf 3.2.so i wanted to start from scratch. i tried uninstalling cemf by using several methods (now i think they're all the same)...it looks like the uninstall script just hangs at this point: ...

I have a client who may bring t1 ATM into the central site out to routers/IADS at the branches. What do I need to connect her 2600 router to the ATM feed? Or what questions do I need to ask to resolve the issue?John G

i was tasked to implement internet access in a hoteldue to budget constraints this can only be done with a 1721 router and 6 2900 series xl switches.1) the router should provide ip address for all host2) host should not be able to see each otheri am ...

We have a web-based application which some of our clients access via the Internet and others via Frame Relay. (They come into multiple routers, but it's all IP to us) Frequently the clients are doing many to one NAT (i.e. PAT) on their router (anyt...

Hi!We have a Cisco 3660 and a ADSL line (2Mbit/s download, 0.5Mbit/s upload) over here. We recently added VoIP to our site. It works great since we just use it for internal communication, when going out it goes straight to a PSTN Gateway.We also have...

I have a E1 link, using microwave radio link. I wish to terminate one end on a 7507 router using the PA-4E1G/75 and the other end on a 3640 using, using vwic-2mft-e1. Would there be any problem with this. My concern is that after configuring the chan...

I'm preparing to convert two pair of 6506s from native IOS version 12.1(8a)E5 with redundant L2 and static routes to hybrid code. Is there converting tool available for this? I need best practice recommendations to minimize problems as these are the ...

This is a partial output of what I got from a show nvramenv performed on a 4006 sup module:BlockedGigaportCount="xxxxx"where xxxxx is a number. Has anyone seen this before? I can't find any reference to this on Cisco's site or in these forums. The sw...