Other Network Architecture Subjects

I am getting a high count of CRC errors in one of my locations when uploading files to the network using one of my Cisco 1552e YAPs, and the distance is over 25 feet from the PoE Injector. Hardware:Switch - Cisco 6506.YAP – Cisco 1552e. I have run th...

Please advise for get MTBF & MCBF of SG90-08.

Hi,I have a Cisco Catalyst 2960S-24PS-L and I want to use a Skylane SFP (1310nm/20Km/GE). But the sfp only works in ports 26 and 27. It doesn't work in ports 25 and 28. Does anybody know why? Thanks.

I need to change all existing HSRP configurations on the 6509s. I'm thinking to clear the existing config first, but not sure which command can clear all HSRP at once.Right now I have:standby 1 ip x.x.x.xstandby 1 priority 150standby 1 preempt delay ...

Hello guys. I need some help with flow control. I can't undertand  a logic how this functional works? When I turn on flow control on port does it start sending pause frames or start to listen pause frames on this port? I have a scheme PC1->SW1->SW2-P...

I've run into a strange problem. 3560 switch, connected to a 7940 phone, port config as shown below.I can connect some PC's (Windows 2000 and XP) to the phone and the config works as advertised (phone gets the voice vlan and the PC gets the data vlan...

Hi guys , I am using CISCO any connect mobile client connecting to VPN.I am facing some connection issues .From office network , i am able to connect fine .But from home network i am getting below error and not able to connect at all . "The anyConnec...

Is it possible to restore a Backup Config from a in service switch to a new switch?EX: I have a Cisco 3650 with Version 15.  I purchased a refurbished Cisco 3650 with the base Version 12 on it.  My thought process is that I would like to clone the in...

hi i want a price for this thanks (in attachment)  

Learn more about the team and their roles: http://cs.co/ELT

I am using a trial version of PowerVT to connect to my router. My laptop is connected to the console port on the router with an Ethernet cable.Do I use the telenet or the terminal connection? I have tried both. The terminal only connetct to the com p...

Hi,My query is this, If I remove a WLC from WCS do I have to manually remove the AP's from the "Monitor > Maps" section of the WCS; or they automatically removed when the WLC is removed? Regards, Dennis.

My company bought a new cisco prime device with a part number of PRIME-NCS-APL-K9 , and 2 License PAK . one is L-PILMS42-KIT and the other one is R-PI2X-K9 . Now after initial configuration of the prime and we were able to access through browser , th...

Hi,I used to use KTN (Known the Network) to do network discovery and inventory, please what is the last tool to do it?tks