Other Network Architecture Subjects

I have a 7206 vxr router. I have code on slot0: and on slot1: I can read,write and format each slot.. I have the commands intered in the config:boot system flash slot0:c7200-jk2o3s-mz_121-9_E3.bin boot system flash slot1:c7200-jk2o3s-mz_121-9_E3.bin...

Hello,sorry i'm a bit lazy to seach for myself but I was wondering if any of the Cisco switches have a WAN interface?thanx.

Please, can anybody answer this topic.Catalsyt 6507 with 2 redundant SUP I. Is it posiible that all GE ports on both supervisors (4 GE) could be active and receiving/forwrding traffic even if one of the SUP IV is in standby?Cheers

HiI´ve read that an interface can not be speaking in more than one ISIS area, and that is possible that a WAN interface can speak in more than one ISIS area using sub-interfaces, a sub-interface per IS-IS area.Does anyone know if this is valid for LA...

Hi,I am looking for a Cisco product that is capable of demultiplexing 34Mb tot E1.Our Telco wants to deliver us a 34Mb to our Access Servers.Please help,regards,Martijn Koopsen

When I attempt to update packages from the stagging area I get a message "intergration utility not loaded." Any ideas?

Hi AllI am here with this question again because I still have the errors thrown up at me every second. The following errors:2003 Jul 02 09:31:41 BST +01:00 %SYS-4-P2_WARN: 1/Invalid traffic from multicast source address 45:00:00:56:1d:90 on port 1/22...

Hi,We have ethernet switching network consits of 14 switches of 5500 and 6500.In last two three months we are facing the error disable problem,it only happens in Laptop's port or manager's port becuase they use laptop....they used to go from one pl...

If a policy map is applied to an interface. Does the traffic get cef or process switched? Is the router's behaviour platform dependent?

HiIs their anyway that I can identify unused ports on our access switches (3500s). It would be very usefull to, say, run a script to do this which would then shut these ports down.Other wise Im going to have to enter each switch individualy and do it...

pc1-----2950-----2621xm--------7513------6509-----pc2when pc1 ftp to pc2.It can get files and put small files.It can't put large size files.2621xm connect to 7513 with frame-relay by serial interface.The mtu on 2621xm and 7513 serial interface is 150...