Does anyone know if you can use standard PC DIMMs in a 3640 router? I'm sure it's not supported by Cisco, but has anyone ever done it? The router recognizes the new memory, I just don’t know if there would be any long-term issues?
We have to migrate our Windows server to Windows 2000 SP3, and we still have CNR 3.53 on the servers to upgrade to W2K SP3.Is CNR 3.53 (DNS & DHCP) works well on Windows 2000 Server SP3 ?
Hello All,Can anyone let me know the command how to remove the particular Vlan assigned to particular port on 6509 MLS . For example , currently , port Number 8 on module 2 (2/8 ) is assigned to Vlan 10 . I want to remove this Vlan 10 on ...
Is there an IOS command or CatOS command that tells me where my root port is on my switched network? I have a Cat5500 as my core switch and various Cat 3524 XL switches mixed in with some Cat 2900 & 3550's. I am certain that my root port is on my Ca...
Hello, We are testing a Cisco 800 ISDN router for perform electronic payments over IP. We want the connection was up only when the application has an open socket. We want the connection go down when the application closes the sock...
I bought a cisco switch 2950 to replace a small hub that was being used at my work place. The current settings are:Cisco Bridge Airbr340 plugged into the hub, then all the computers are plugged into the hub. All using a straight through cabling, and ...
Hi,if i run the following command for verify the VTP version on a cat6509 I can see:#sh vtp domain...DOMAIN INDEX: 1VTP VERSION: 2LOCAL MODE: ServerV2 MODE: disabled ...The question is : is the VTP running the version 2 or the version 1 ? What does m...
HiThe following change request came in from one of our managend router customers.arp 172.31.2.5 0100.aaaa.aab1 arpaI believe they were installing a new firewall that requires a multicast address.Can anyone explain what the above entry is actualy doin...
Hi Forum,I get the following error message when I try to monitor a 3600 router: "No such instance error on dsx1 CurrentCSSs.4"We've got some other 3600 devices in our network, but only one of them is reporting this problem. Configuration, agents, pat...
Hello all,my problem in theory is simple but I cannot explain the reason for this failing. I am testing an aux to aux port remote connectivity using identical US Robotics 56k voice fax modems on either side. The routers being used are X2 Cisco 2501's...
Hi I 'm seeing 8% CPU used by the "Synconfig" process on a cat4006 running 6.1(1) which I think is quite high. Also this switch has got only one supervisor.What does this process represent ? Config Sync?Atul
We have 11 catalyst switches, 3548s and 3524s.I have turned on logging at the warning level.I checked the logs the next morning and found a whole bunch of entries like the following:2002-11-12,06:46:04,xxx.xxx.xxx.xxx,23,3,9687: 8w6d: %LINK-3-UPDOWN:...
I am trying to upgrade my IOS on my 1605 router. I seem to have done it but whenever I boot the router, it boots into boot mode (ie, Router(boot)>). How can i get it to boot to flash??
Is their a special syntax to use so that from a remote location via an internet web browser i can retrieve a page from a server that is on a NAT'd isp.something like http://xx.xxx.xxx.xxx (being the global ip) and then the local NAT ip 192.168.1.2 so...
