Other Network Architecture Subjects

We are testing the Cat6509 with the 10GE Moduls (WS-X6502+WS-G6488). This two boxes are connected via DWDM (ADVA FSP3000) and Trunk-Ports. One of this ports gets errors (undersize-packets). This port only receives broadcasts and some management-traff...

I have a wide-spread network of switches at customer sites that are not part of a large VTP domain. I want to assign MAC address to particular VLANs on the customer premises 3548 switches. Here are some questions that are centered around VMPS but y...

Can I take ATM PVCs from an OC3c interface and map them to an 802.1q trunk port on the 8540MSR?

I'm trying to test Mobile IP in a lab. It's a simple set up:Foreign Agent LAN---R5----Frame Relay----R4-----Home Agent LANHowever, I keep getting a rejected message out of debug ip mobile on R5 when I move a machine to that subnet. Anyone have thi...

I have a 2600 router ,I wish get load sharing use T1 + DSL line.This is impossible use BGP in my ISP,somebody told me I can usetwo DNS server to do load sharing,but I don't know how to do detail.I haven't no money to use like linkproof box,my topolog...

I am trying to determine the maximum bandwidth that can flow through a switch by using a formula that takes into account the number of ports and the port speed e.g. 48 Gigabit Ethernet ports. Can anyone tell me the formula to calculate the maximum ba...

during manual or scheduled Backup in CW2k, 4th Ed., I'll receive the following messages:*************************************************Backup to 'D:\dailybackup' started at: 2002/04/30 20:30:00Archiving the contents of the following directories int...

Hi , I am using LMS 2.0. I installed the device pacages for Aironet AP340. I can use ciscoview to brouse that Aironet devices, also in network topology display view it show's properconnected and Green. But the problem is that In Display view it's sym...

helloif we have 2 switchs stackable but not in the same serie.let's suppose: 2924M-XL and a 2950.both of them r said stackable.but if we cascade them using gbicstack or any 10/100 port, do we loose the stackability?in other words can we manage both o...

Hi, As I understand, on a Cisco router can be configured up to 600 rate limits, based on access-lists. How many shapers I can configure on a Layer 3 switch?. Or, how I can implement same speed shaping for many IP addreses? For example: 200 IP address...

I tried to copy config of PIX 520 to tftp but got got failed message wilth unknown reason...wr net tftp:filenameRegardsRaza bhutta

I was trying to add a used Cisco2802 switch to my Lab but can'nt reset or recover the old password. Any help is appreciated. I tried but can not make it work.Thanks

Our field user use dial-in modem connect to cisco box, once dialin access granted, the cisco box auto-connect to socket port(say 2002) on the backend file server. A server app listen on that socket port (2002), waiting to serve file.My question is :...

Can anyone tell me if it is feasible to try to get an ISDN line up and keep it up for weeks/months at a time? I want to do a LAN to LAN VPN tunnel using a 2621 at the remote site and coming into a 3005 at the central site. My goal is to put an IP p...

I am having a L3 switch ( CISCO 4003) and have several VLANs defined.I want to extend just one of the VLANs across a WAN to another remote location. Is this a supported solution ?