The CLUBNETMAN Msg 3 (23 Nov 2001) - Enterprise ManagementNewsletter mentions a special DFM patch 'must be directly required' at Cisco.I assume this means I must go and get a patch but it gives no more details.Any ideas folks?
I have arrived at a new situation and they are asking if bgp is an option, I dont beleieve they need it but here are the params. Network consists of two T1s via dif isps. we have five remote office that use frame to conncct to us, and we have 16 offi...
Has anyone ever used the HighAvailability Feature of the Hybrid CatOS on a Cat6K to do the software upgrade ? If so, how reliable is it ? Any gotcha's encountered ?I have a dual SUP/dual MSFC configuration. SUP's are being upgraded to CatOS 5-5-13a f...
Hi,I'm trying to find information about the Cisco QoS Policy Manager concerning the propagation mechanism used between PDP and PEP's.My doubt is if only the COPS protocol is used or also SNMP can be used for that!ThanksV.Roque
Can a Cisco AS5300 support 802.1Q encapsulation on its fast ethernet interface (DEC21140AE hardware), and can it, with an appropriate release and feature set of IOS, support inter-VLAN routing via subinterfaces?If so, what minimum feature set and rel...
we have a small 340 lan. we like to link two bldg's .75 miles apart. we are planning to use: AIR-1-ANT1949 Yagi &1-AIR-ANT4121 Omnido they need line of sight plus 13 feet of height above line of sight? thanks
Hi ,I need to know if 3640 support PPPoA, becouse I read that is not supported, but when I digit IOS command to configure it, it takes them.THANX a LotMarco
Im I correct in saying that the command:SET SPANTREE PRIORITY 0 5will prevent this particular Cat5000 from ever becoming the root for spanning tree on vlan 5. I think so but I'm not positive. Can anyone confirm this. Thanks.
Hi,Having some strange problem with some new 8MB Flash modules for my2500's.I can not seem to write to them in any way. This chips are recognized by the router, but when trying to copy an image on to them there is an error:%Error: System flash write ...
I've gone through all the documentation, and I can't get any traffic info from my routers using netscout? It doesn't look like it should be that hard, but I can't figure it out. I have 3640's, 2610's, and 7200's. Can someone please help me? Thanks in...
Customer is using Win 95 clients to dial-up (using iSDN) to multiple PRI's on 3660's. Only PAP is used, they wish to restrict access to devices not configured to belong to specific IP subnets.Obviously access-lists will prevent data being sent to the...
i have copy a new IOS in my second partition of the flash (flash:2), when it end copying i have recieve : invalid checksum (expected 0x8AA5, computed 0xE09E)what does invalid checksum mean and how i can solve this..sh flash:2System flash directory, ...
I'd like to know the delta for latency between a Cisco Router 2600/3600 running IPSEC56 encryption and the same router with an Encryption Card 2600 AIM-VPN/BP- OR A 3600 WITH A NM-VPN/MP module. Also will the module affect the 2600/3600 routers abili...
We have multiple VLANs in our network (network is not functional, creating congfiguration templates)and we are running HSRP on both MFSC in distribution layer. I have configured the preempt command on both active and standby interfaces to force the M...
