Is it possible to use the 7513 Router as a seed device on campus manager(switch is recommanded as default)?I've installed Campus manager on CiscoWorks WAN Manager.Does Campus Manager work properly on CWM?
Is there a feature that allows hsrp hellos running over a different link? I'm thinking about 2x2600 with each one serial and one ethernet interface. They are both connected back-to-back with the two medias. HSRP should be configured for ethernet but ...
I have tried to use the cluster management features of the 2900 and 3500 switches. But I stopped using it, as my network monitoring station couldn't ping each one. So now, in my stacks of 3524s (for example), I configure each one separately, with the...
Hello,I would need some explanation about the different types of VLANs.In the papers I read about VLANs, I have the feeling that the most popular way to implement VLANs is by port. But in that case, what happens if a PC changes from one location to a...
I can ping the unix box from the local lan, but cant ping the same ip from the host router. I can ping other divices on the same network. Is this just an issue with the unix box. Any advice appreciated.Frank
Hi ;anyone have any idea for this issue ?One of my customer have a WS-C2912MF-XL which running fine. But when they upgrade a module WS-X2914-XL-V (4 port UTP module) in WS-C2912MF-XL, the 4 port UTP all lights on with amber permanently. Though that i...
my dial-in router after sometime will crash and restart after displaying this error on the console: 3d19h: %SYS-2-MALLOCFAIL:Memory allocation of 1680 bytes failed from 0x317A4D4, pool I/O, alignment 0-Process="Pool Manger", ipl=6, pid=4-Traceback=31...
I have 6 Catalyst 3524-XL-A linked up via fibre to the Catalyst 3508 XL. I also installed Cat5 Cables from each Catalyst 3524-XL-A to to one of the Catalyst 3524-XL-A which is in the server cabinet, so all the 6 switches have fiber and cat5 cables li...
Hi all,I'm trying to use SNMP to map a vlan ifIndex (obtained from ipRouteIfIndex, for example) to the corresponding physical ifIndex. Does anyone know what OID (or even multiple OIDs) does this? I've looked at dot1dBasePortIfIndex but it doesn't alw...
We need to implement a modem backup to our frame-relay if it goes down. However we are using 1602 routers with T1-Wics for our frame connection. The only ports available for modems are the console and the serial 0 port which is the 56K DSU/CSU port...
Just wondering why this occurs. I place an IP block on the serial interface, say 65.107.130.10/30. When I place my LAN block, 65.107.130.113/28, it errors saying there is a conflict with 65.107.130.8 Oddly, if I place 65.107.130.113/30 it takes it ...
Hi, Would anyone know if a PA-T3 will accept a channelized DS3 signal (eg. 8 Mbs of a 45 Mbs DS3 in 5 channels) or should I be looking towards a PA-MC-T3 (or maybe the PA-MC-2T3+)??Thanks,Paul
greetings. i am still a fledgling CCNA...i have inherited a rather interesting "mess". i have clients plugged into a 6000 series switch. however the cables are a mess and a half...and no documentation too boot. i am trying to figure out which ip addr...
Can't seem to route an IP (i.e. e-mail server's IP) from one location's router through another router. So, one client sits on one side of a router, and needs to go through the next router in order to get to the e-mail server. Any thoughts?
