Other Network Architecture Subjects

Hello,How can I find the fireware version of the router 3725?Regards,VIN

Hi,I have created a QoS policy on a 100Mbps FE interface for an IP Phone and PC which will police traffic to cetain thresholds, any traffic over the configured limits will be marked down to scavenger class (DSCP 8). How can I best load the interface ...

Hi! Please Help, How to block telnet access to a cat-4506 running CAT-OS from local LAN users. i executed a command "set ip permit disable telnet" and an access list is also created but it is not working at all.

We have about 8 6509's in the data center,which are connecting to each other via gig, at this location we have 20 small buildings on the campus which have fiber connections to about 4 of the 8 6509's. I am in a process of installing a separate sup720...

Please, help me !How do i do to write information about user and the change in the log, when the user do some change ?Thanks.Jose Marconmarcon@serasa.com.br

i have ML 450 hp server running trend micro and is used as antivirus server but i have enough space on the server left so can i use the server for cisco works LMS 2.5 installation , i hope the services of the anivirus server are not effected.

pls provide me the configuration of ISDN call out from pri terminated on 3660 to bri on 1721 cisco router

Hello everyone.I'm having problems transfering big packets on some devices.It seems that when I try to use packets bigger than 5128 some are not reassembled.I'm getting these errors:IP: s=10.222.176.1 (GigabitEthernet0/3), d=10.10.31.17, len 752, inp...

Hi all. I am looking to implement a BGP configuration across 2 seperate ISPs with a portable class C range across 2 seperate sites. There would be 4 routers and internet feeds all up comprising of :Site 1 Router 1 - Connection to ISP A to be the pr...

Hi,I have two 7200's connected to a 2950 (FE 22 + FE 24 - Both configured as trunks). On the 7200's, I have the following:7200-A! interface FastEthernet0/0.23 encapsulation dot1Q 23 ip address 192.168.1.1 255.255.255.252 no snmp trap link-sta...

Hi Sir,Two switches, SwitchA and SwitchB, are connected to eath other via a VLAN trunk.SwitchA is a Catalyst 3508G-XL. SwitchB is a Catalyst 2948. Both running Cisco IOS software.The VLAN trunk is established using "on" mode because the switches have...

Gurus, I have a Catalyst 3560, and was wondering what command I could use to show the IP Address of the device plugged into a specific port?Thanks!

Hello,We recently change our Switch to a 1Gb/s Cisco Switch and eveything seem to be fine until my user start crying at me saying they could not access their email anymore, I'm not sure it's the switch or the computer but my first guess would be the ...