Other Security Subjects

Following cisco command references, crypto access-list should be configured in a mirrored way on both VPN endpoints. E.g.:VPN_GW_1:access-list 100 permit host 172.16.1.1 host 172.16.2.1VPN_GW_2:access-list 100 permit host 172.16.2.1 host 172.16.1.1Is...

One of the functions of our PIX 525 is to permit internet access for our users. This PIX does not have direct access to the Internet, it relays upstream to another device that does.Immediately after upgrading to 6.3(3) our syslog server began report...

Hi !We have a Proxy firewall Cluster on the inside Interface of the PIX. FW1 172.16.0.1FW2 172.16.0.2Cluster Address 172.16.0.25What i would like to do now, is to have the pix translate all the traffic from 172.16.0.1 to xxx.xxx.xxx.114 and also from...

I have a PIX firewall (details below) that I am trying to upgrade for 3DES support. When I try to obtain the free upgrade key, I receive a failover only key (PIX TYPE: PIX-515-FO). Am I being stupid, as I only have one firewall and I have not been us...

When setting up auth-proxy on an IOS router using the http server, how does the user access the webpage?Does it get pushed if he's not authenticated? Say an un-authenticated user loads up his PC and loads up his web-browser with www.cisco.com as his ...

Hi AllI would like to know FWSM 2.1 whether is release , I had look up CCO , that release on Q4 2003 , but i had search http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm ,but i can't see 2.1 software versionby the way , i want to know FWSM is p...

Hi We are running webvpn with default group now. How to use WEBVPN with 3015 concentrator internal group or external group with Cisco ACS RADIUS?Thanksben

Hi guys: I have few basic questions regarding IDS.Hope someone can give help me out. 1.Does any version of IDS have SNMP Support. 2.Is there any major difference in configuring 4230 and others like 4235 ,..latest ones ?Thanks a lot

hi theredoes anybody know how to setup emule ports with this routerplease i need help.....

I have a 501 and 506E, with an inside address of 192.168.1.1. (255.255.255.0) The external is say 10.0.0.254 (255.255.255.0). When any requests go to 10.0.0.254, I need to NAT to 192.168.1.20. I only need 25, 80 ,443, and 3389 to come in. I have used...

Hello all,I'm running cspm 2.3.3i on a windows nt server and whenever i try to save and update it crashes without applying the changes i made. I get a message saying Cfmi.exe has generated errors"any ideas??thanks all

Pix has PPPoE single Ip...on the out side ....I need to port map smtp from that IP to an inside IP of 10.0.0.7....is it possible with PPPoE ? and how?I am at 6.3 with 3.0 PDM

I want to setup IDS to shun using a Firewall Service module. However, I am unable to get the IDS device to communicate with it. When I do a show statistics networkAccess, it shows that ids is connecting, but never goes into a state of active. I add...