Other Security Subjects

I am having an issue with a Cisco 3000 VPN server. Multiple clients at one location need to connect back to the VPN server via PPTP. The location is served by a DSL line with a basic NAT router. The first client is able to connect and the rest are re...

I have web servers in a DMZ with public IP addresses. When I want to allow access from the outside, do I need to use NAT Bypass and the static command in combination or will an access-list suffice? Because to me it looks like they accomplish the sam...

Cisco PIX Firewall Version 6.3(1)model: 515e----Is is possible to have the PIX use PAT for outbound traffic, like FTP and HTTP to any IP address, but then have it use NAT only to a few specific destinations?Here is the problem I have which may help e...

Hi there!I have 2 dsl line but only one is hooked up to my pix515e, would it be possible to connect my other dsl to boost up speed? if so how would I do that?Any suggestions are welcome,Thanks.cym

Are there such commands? The sensors are at 3.1(3)s34.Thank you

Hello all, can anyone tell me how to interpret syslogs on my router? The first few words are date, time of log. But what does the rest of the stuff mean? Thanks in advance for any help!

Has anyone experience with IPSec over GPRS?I have troubles in getting LAN-to-LAN IPSec with two 805s running. Initially, the connection works (ping), but after some seconds/minutes the ISAKMP SA's will get deleted:deleting SA reason "death by retrans...

In the past 4 days I'm seeing a lot of 105005 messages in my PIX logs.105005 (Secondary) Lost Failover communications with mate on interface 5I then see 105008, which tells me it's testing the interface.Then 105009 saying the test 'PASSED'.10 instanc...

I am using DSCP values (26 & 46) to mark my voice packets in the service policy. If I apply the policy to the physical interface, do I need to to use qos-preclassify in the tunnel interface ?

IOS router 12.1 dialing into Internet using ISDN and can establish the IPSEC tunnel with the PIX at the remote end. PIX configured with dynamic IPSEC config for this connection. Tunnel is established when a ping is initiated from a PC behind the rout...

I have one hub(cisco 2621)(2M link) and 9 spokes (Cisco 1721)(512k link) network. I am using Multipoint GRE with NHRP to interconnect them and I am running OSPF. My spokes always recieve about 10 following messages per day.%NHRP-3-PAKREPLY: Receive R...

How do you account for spaces in the regex string? Suppose I wanted to match on the word "thanks." How can I set the custom sig to account for the space before and after the word, as well as making sure "thank" doesnt show up, only "thanks." I hav...