Hello All ,we have upgraded VSM from 6.3.2 to 7.2.2 and after that we are unable to access Application . is there any way to revert back to the old version or any other way to fix this issue . SSH access is available .please Advise
For the Media Servers, there is a formula you can use that will tell you how much space you need based on the expected number of cameras, bit rate, frame rate, and retention period. Requirements change, but this at least gives you a baseline or start...
Our legal department needs to view an old CVA file from 2010 that was created in VSOM 6.3.2. We cannot view it in 7.5. Does anyone have the old Cisco Review player that they can send me or send me a dropbox link to download it? Please help!
We have a Cisco CIVS-IPC-2930 PTZ camera and the web interface is inaccessible. Navigating to the page returns an error "500 - Internal Server Error". Our VSM is still able to pull the feed from the camera, and I can access it via SSH, just not th...
Here's an issue that's stumped me since migrating to VSM 7.x. When we were on 6.3.2, we could configure a view with multiple rotating panes. When displaying these views, if we needed to focus in on a camera, we could select a camera and have it pause...
There are several cameras in our system that need to be updated. Seems simple enough, right?? They are 2600s (via logging on to the camera) and VSOM is showing on the General Information tab that they are 2500s. So, the Template, the Model and the ...
Has anyone tried to use the bulk firmware upgrade option in the Systems Settings tab? I was able to get all the set up done and chose the 8 cameras that I needed to upgrade. The job seemed to finish successfully. However when I checked the firmwar...
Hi folks, I have an odd issue here that perhaps you might have ran into. So we just upgraded from VSM 7.0 to 7.2.1 and I thought it would be a good time to start firmware upgrades to cameras to the latest version (2.5.2-2) to prepare for 7.5. I deci...
Hi All.one of our customer needs to upgrade his existing vsom and vsms from 6.3 to 7.2 and hehas purchased the below licenses and he dont need any of the existing data.L-CPS-M-OM-SW7L-CPS-M-MS-SW7L-CPS-M-SASD-7.as this is the first time I am upgradin...
Hii have Multiservices Platform 1-RU and 12 IP cameras that we need to install it in our company. this is the first time for me in configuring that.i read the VSM userguide and some datasheets but i have some questions:1) what is the difference betwe...
VSM 7.2 Question. If I have an array of servers that were upgraded from 6.3 {ie SUSE} and I need to add a new media server to the bunch, but I want to make it a virtual media server on a B-series server, since I can only find Redhat OVA, will a redh...
Is that just the new part number for CIVS-MSP-1RU? I have ordered 2 CPS-MSP-1RU-K9, one as a recording engine with VSMS 6.3 and one for VSS Alloy. I was just wondering if I have ordered correctly. or do I have to ordered CIVS-MSP-1RU as a recording e...
I have 4 CPS-MSP-2RU-K9's that were part of the BoQ. Would I be better off gettig a 1RU, configuring RAID and using that to run VSOM and using the 2RU's as Media Servers? From researching, it seems like this might be the way to go.
We have a two CPS-MSP-2RU-K9 Servers with VSOM + VSMS in both the Servers.That is ( VSOM+VSMS) in Server-1 and again (VSOM+VSMS) in Server-2 .Can i have Redundancy for VSMS and also for VSOM by this Method ?Does VSOM in one Server-1 can have...
Hello All,I am trying to contact a cisco engineer called Gavin Middleton who worked with cisco equipment for a glasgow based company called Pointer.I have a vsom system on site and require Gavin to release the root password when he installed it on ou...