Physical Security

Dear All,I have customer that have an enterprice Cisco VS solution, the problem is now in adjusting the NTP on the VSOM/VSMS servers ,as we adjust them to use the IOS NTP of the BB , we now get differences in the times on most servers which reflects ...

We have events set up to archive motion events for 30 days.  Are schedules required for the motion events?  We have never had our system set up this way previously and this past Monday, every archive started over and anything previously recorded is m...

Hello everyone,I booted one of our servers this morning and was greeted with the following mesage:Press <Ctrl><A> for Adapter RAID Configuration UtilityController #00: Host RAID - ESB2 at PCI Bus:00, Dev:1F, Func:02No logical drives foundNo Int 13 Dr...

Dear all dose everyone know how to config the protocol-41 at ASA5520 for IPv6 tunnle, it someone knows about it please provide me the complete config details.thankszubair

Hi allSome one know if there is a way to configure VSOM to do a GuardTour on a IP Dome Camera?At this moment the only way that i've found is to configure the guard tour directly on camera ( eg Axis 233 ).Best RegardPaolo

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to get an update on the Physical Security with Cisco expert Gerry Burgess.Remember to use the rating system to let Gerry know if you have received an ad...

We're looking for a source of Cisco sub-surface "fake" camera domes: White "Cisco" branded rings with smoke domes.  Used, old, or new.  No cams, no cans, just the visible parts of a 2611/2421.=)

Has anyone seen that the new Cisco 5000 series cameras wll not pull the proper ip address when you create a Mac Reservation for it based on its mac address as other cameras do.It uses some UID to perform DHCP and this is not listed anywhere on the ca...

Hi,I installed the CPAM client software onto a PC running Windows XP professional Service Pack 3 with no problembut then I had to uninstall the software again and that was also a success.Two weeks later I was asked to install the client software agai...

Will the Cisco Media Server support saving data to a NAS, or SAN?

Hi,If i upgrade my ASA 5510 to version 8.4 can i run a dual isp? Can this be run concurrently or is it just setup as a failover?thanksCraig

What Requirements are needed toset up a Centralized Authorization Databasesuch as TACACS+Also, will the TACACS+ server support Foundry and Brocade ?Thanks,Doug