Routers - Small Business

I know that Cisco will release a new firmware version for the RV042 to solve the problem again? And when? Or may be the final version?Fix ? Load balance function poorly.

I have changed administrator password to a secure one, just after the changind the password it logged off and offered to login.Now when I put the same password it writes: Invalid password for Admin userPassword I used: 8_^!-,Opc:{5Gj3v5<Xb06?9z\\SeWr...

I want to setup a simple VPN to allow users to access the office via the iOS (iPad/iPhone) devices.  I assume I do this through:VPN>IPsec>Basic VPN SetupBUT, what do I enter for the "Endpoint Information" and "Secure Connection Remote Accessibility"?...

Hi there,I have recently took up a fibre internet plan with my local telcc. This plan comes with a ont and stock router from the telco. They configured their device in a way where internet signals are tagged on a specific vlan all the way from my wal...

How can I see a list of all of the host name and IPs currently connected to the router?Broken up by VLAN preferably.

                 Hello, looking for some guidance here...Have multiple RV082 v3's running the latest code level (RV0XX-v4.2.1.02-20120118-code)and they are being scanned from the corporate side and they are tell me there is a "SSL Server Allows Clear...

I have an issue that I hope someone has an answer for.  I have a static IP block and need to route to various servers.  I know I can use 1:1 NAT or Access Rules and have success with each.  The problem is my mail server.  When I use 1:1 NAT, the mail...

I updated my RV180W to the latest firmware and found that port forwarding works I started using it.I've just noticed that since changing over to the RV180W, my Apacher server logs show the router's IP address instead of the remote IP address - every ...

is there anyone who can light up my day by posting a solution for NAT  only for a specific ip address or a range of ip addresses from the same  subnet?i've read that the router in gateway mode  automatically makes the translaltion and in router mode ...

First off sorry for silly question. I installed the RV180W yesterday and decided to play with it a bit today. I got stuck on the firmware update. Tried different browsers on different PC's. Tried going to 1.0.1.9 first. I have the "reset all configur...

Hello everyone,I've looked around and cannot come up with a fix to my problem.  First off let me say I am very new to being an IT guy.  I was kinda thrown into it here at work.  Anyway,  I have a network here at the office where we host our own busin...

Hello,I try to make a VPN connection with another router (not cisco) and the communication starts, but ends with hash mismatched error.Here is part of the log file:Mon Mar 18 17:53:40 2013 (GMT +0100): [router38FC36] [IKE] INFO: Received unknown Ven...

Having a bit of trouble getting my ISA to use my CA signed certificate.  Here is what I have done:1. Under Device Management --> Certificate Management I created a .csr.2. I then uploaded that .csr to my CA (Godaddy).3. Godaddy then approved it and c...

Hello,I am having some difficulties using RDP on the LAN of the router. I previously had a Linksys E4200 router, and I was able to RDP from my Win7 computer (192.168.1.139) to my Win2k3 server on the LAN (192.168.1.251) with no issues. However, when ...